PDA

View Full Version : On/Off Pin Sticking HELP!!!!!


METHOD36
02-20-2002, 08:57 PM
The on/off pin is sticking in my mag, tried oil, worked for a little while then the problem started all over again?
GIve me some ideas please
Thanks
Havoc_online
02-21-2002, 04:53 AM
could you be a little more specific, what does it sound like? is you on/off pin in the right way and not backwards?
METHOD36
02-21-2002, 11:21 AM
well what happens is when I go to take a shot and I pull the trigger back all the way the trigger rod does not return all the way and it leaks. But after I take next shot it will fire two balls and the trigger rod returns to it's normal length. The more I thought about it's got to be the on/off pin and it is in correctly I belive.
BlackVCG
02-21-2002, 12:32 PM
Make sure that the grooved end of the pin points away from the valve. Or just look at the diagram printed on the valve...
METHOD36
02-21-2002, 02:52 PM
the pin is in the right way but it still doesnt help
markhauguel
02-21-2002, 03:27 PM
Mine would act like that but I fixed it by putting oil in the line more often (every time I play first thing). That seems to work. Good luck
Havoc_online
02-21-2002, 03:48 PM
what's your input? have to taken out your sear and made sure nothing is in the way to restrict the trigger rod from coming out? maybe changing your spacer would give your on/off what it needs.
EnW
02-21-2002, 06:24 PM
Give me some info on the grip frame your are using.
I have a benchy with a homemade trigger stop that I had some trouble with and it was doing the same thing you are saying yours is.