do you want new clamping feednecks?

[Nobody]

with the supply of Angel threaded clamping feednecks starting to run dry, and CCM feednecks are there but lacking(i hate them personally, but at times they are the only choice). do you(AO & AGD community) want a new supply of clamping feednecks? what would you pay for one/them?

i think i've found something that can work and is readily available. i can't really go into detail, but suffice to say, for a little work on my part, i can get and supply new feednecks for all.

so i want to know what everyone thinks. also, this isn't a pre-order. if i get enough interest, i will then post up made items for sale. basically, its a demand and supply. as long as everyone is demanding them, i will supply them.

[Laku]

Ideally I'd like adapter for for something like Empire clamping feedneck
88964

[Runamok]

(little kid sing song voice) I know what what your doing. Go for it! I want to see if you and I are thinking alike.

[steve_81]

Yea, depending on cost I would be game for new feednecks.

[dodge3500]

Sounds good.:-) I'm not much on CCM ones at all.

[BigEvil]

I know what he is up to and I approve!

[river031403]

Ideally I'd like adapter for for something like Empire clamping feedneck
88964

Adapters are out there. Gearheadz paintball makes them

[Nobody]

forgot to post this up, i'm looking at selling these for about $35-40 for a complete feedneck, ready to mount to your gun. but, in order to do this, i need to get the feednecks, which is the all on my end. i want to make sure that i have them, in hand, before i sell them.

on Monday, i should be able to post up what i'm thinking of doing. IF there is enough interest.

[Laku]

Adapters are out there. Gearheadz paintball makes them

Really? Didn't know that. Thanks!

[debruynda]

I'm in the market for a couple. You have my interest, and may have my money depending what the final products "looks" like.

[Patron God of Pirates]

$35 - $40 is right in the wheel house of what I would expect to pay. In the market depending on appearance and profile (RPG sub-zero being the gold standard in my book).

[Xmagterror]

Curious to know what you guys dislike about the ccm units? Other than they are not of the cam lock design. I would say the quality is top notch.

nobody: cant want to see what you come up with. I may buy a few.

[Laku]

Curious to know what you guys dislike about the ccm units? Other than they are not of the cam lock design. I would say the quality is top notch. nobody: cant want to see what you come up with. I may buy a few.

I rather like the no-pro ones. But they aren't as easy to source as the others are.

[Patron God of Pirates]

Curious to know what you guys dislike about the ccm units? Other than they are not of the cam lock design. I would say the quality is top notch.

No problem with quality at all. I just don't like that they have CCM printed across them. Just a peeve of mine, unless you're sponsoring me, I don't want your logo's all over my markers.

[TimmyJay]

I agree with PGOP. RPG Sub Zero is the standard to me. If it is better then I would be interested in one.

[OPBN]

Is AKA and A+ no longer making them? AKA are IMO one of the best around and they're only $20+ shipping: http://www.akalmp.com/feedtubes.html. A Plus is still selling theirs as well for $ 30: http://www.aplusp8ntball.com/camlocks.html. While its always nice to have options, IMO $40-50 is well past market considering you can get the CCM ones for like $25...

My .02.

[Laku]

Is AKA and A+ no longer making them? AKA are IMO one of the best around and they're only $20+ shipping: http://www.akalmp.com/feedtubes.html. A Plus is still selling theirs as well for $ 30: http://www.aplusp8ntball.com/camlocks.html. While its always nice to have options, IMO $40-50 is well past market considering you can get the CCM ones for like $25...

My .02.

At least the email that's associated on A+ paypal account was invalid when I tried to buy one of theirs, which makes it a bit risky/fishy on my book.

[BTAutoMag]

Can we have them say AO Army?

Either way, im in.

[Patron God of Pirates]

At least the email that's associated on A+ paypal account was invalid when I tried to buy one of theirs, which makes it a bit risky/fishy on my book.

That and most of the images on there website are broken. The AKA's look nice though.

[OPBN]

That and most of the images on there website are broken. The AKA's look nice though.

I have several of them and love em. I actually replaced all of my CCM ones with them. Only downfall is they only come in polished black.

[captian pinky]

No problem with quality at all. I just don't like that they have CCM printed across them. Just a peeve of mine, unless you're sponsoring me, I don't want your logo's all over my markers.


did you try calling ccm to see if they would sell one with out a logo.

[Patron God of Pirates]

Honestly the thought never occurred to me. :tard:

[OPBN]

Honestly the thought never occurred to me. :tard:

Ive bought a couple of them through SSP Reaper here. If you contact CCM, they will sell them to you sans logo.

[Justus]

I like the A+ feednecks too. Only place to reliably buy them new is eBay when they list a slew of them from time to time.

[wimag]

No problem with quality at all. I just don't like that they have CCM printed across them. Just a peeve of mine, unless you're sponsoring me, I don't want your logo's all over my markers.

they will accommodate you if you ask them. Find your own lazer guy if you choose to do so
http://img.photobucket.com/albums/v283/RTE33/DSC05957_zps2dae2560.jpg (http://smg.photobucket.com/user/RTE33/media/DSC05957_zps2dae2560.jpg.html)

[BTAutoMag]

Love it.

[barkingspider]

At least the email that's associated on A+ paypal account was invalid when I tried to buy one of theirs, which makes it a bit risky/fishy on my book.

I bought a few from them a couple months ago. I thought the same thing and even talked with paypal after finding the email address and phone number not working. They were initially responsive to paypal, and then later they were to me. He stated that he had separated some of the businesses he had and that it hadn't been updated on his website. Art is the owner and told me that he had sold off his anodizing business, but still has the paintball and machining. I received everything very fast. A little unnerving to not have the contact info working, but he told me that he would have his web guy fix everything.

I know you can reach him at this email since it was the one he was communicating to me about a month or so ago

[email protected]

I'm hoping this post is taken more of information to a fellow member, rather than deflating the heart of Nobody and his inquiry of selling a future product. I for one love options of quality items, and I'm anxious to see what you have in store.

[SoulCoffin]

I'd be down for at least one, doug (I'm trying to cut down on projects and markers, a bit)

[Nobody]

here's what i've been doing with all the stock ULE feednecks as it sits on my Emag
http://i290.photobucket.com/albums/ll255/Nobody609/100_1164_zpsf067b36a.jpg (http://s290.photobucket.com/user/Nobody609/media/100_1164_zpsf067b36a.jpg.html)

the feedneck
http://i290.photobucket.com/albums/ll255/Nobody609/100_1168_zps0359f27c.jpg (http://s290.photobucket.com/user/Nobody609/media/100_1168_zps0359f27c.jpg.html)

and my adapter as it sits on the body
http://i290.photobucket.com/albums/ll255/Nobody609/100_1166_zps9062d195.jpg (http://s290.photobucket.com/user/Nobody609/media/100_1166_zps9062d195.jpg.html)

so Laku, you win an eCookie

so what y'all think? any and all questions will be answered.

[SoulCoffin]

Wow, that's nice

[Laku]

Yay! I got cookie!

Colour me interested. :)

[Nobody]

so, no questions? granted, its a simple operation, but no one wants to know if there is a shot trap/gap between the body and feedneck, or if you see the anno through the gap, or anything?

if not, then awesome. i have the feednecks coming and should be ready to sell sometime next week.

[maverick13]

so, no questions? granted, its a simple operation, but no one wants to know if there is a shot trap/gap between the body and feedneck, or if you see the anno through the gap, or anything?

if not, then awesome. i have the feednecks coming and should be ready to sell sometime next week.

Yes, I've a question, as it's very close to the body, is there a risk to make marks in the ano when screwing the feedneck ?

[dano_____]

One question, can I send you my ule necks to have this service done or will you only sell the necks? I have a couple and have always wanted to put an empire spring feed on my tac-one.

[BigEvil]

Im going to try to find something that Nobody can modify for me that will allow me to do this to the Xmag breeches instead of using the CCM feednecks.

[Nobody]

Yes, I've a question, as it's very close to the body, is there a risk to make marks in the ano when screwing the feedneck ?

the feedneck does not ride on the body. when turning it on, it won't go into the anno. if i'd have to put a number on it, i'd say it was a couple of millimeters difference. i'd have no problems putting this on anything special.

[Nobody]

One question, can I send you my ule necks to have this service done or will you only sell the necks? I have a couple and have always wanted to put an empire spring feed on my tac-one.

i'd wouldn't have a problem just making the for people but i haven't put a price to do that yet. i don't have a spring feed on hand, but can borrow one to mock up.

[maverick13]

Thanks for this answer.
In this condition I could be interested by one.

[Sk8ermog]

I too would be interested in one that would work with an Empire Spring feed. I have one that I'd be willing to send you along with about 4 stock feednecks. Once you get this worked out and the feednecks in hand will you be writing up a dealer thread?

[Nobody]

I too would be interested in one that would work with an Empire Spring feed. I have one that I'd be willing to send you along with about 4 stock feednecks. Once you get this worked out and the feednecks in hand will you be writing up a dealer thread?

i have one that's semi local to me. just have to say, i need to borrow it and i'll have it. makes it a little easier.

but yes, when i have the feednecks in hand, i'll have a new thread made up, with more pictures, details and the sale details.

[djinnform]

I would like one that works as well as my Ego 11 feedneck. I would buy one. The RPG Sub-Zero looks and works the best, but sometimes I'm rushing between games to switch things out and I don't have time to fumble for an Allen key.

[djinnform]

I couldn't find it on the Gearheadz site, where is it?



Adapters are out there. Gearheadz paintball makes them

[Laku]

I couldn't find it on the Gearheadz site, where is it?
Me neither.

[Nobody]

if i can't get anyone to buy adapters and feednecks, then i will certainly just sell the adapters. sucks that the Gearheadz bodies are cocker threaded, i can't help with that.

[Laku]

if i can't get anyone to buy adapters and feednecks, then i will certainly just sell the adapters. sucks that the Gearheadz bodies are cocker threaded, i can't help with that.

I think I'll take at least one with the feedneck.

[maverick13]

I think I'll take one too, depending on shipping cost to France ...

[PyroFiend]

Yeah I could use one for me Emag. I'm pretty sure it's angel threaded.

[Nobody]

I think I'll take at least one with the feedneck.

my intention is to sell complete units, new feednecks with my adapter.

[Nobody]

I think I'll take one too, depending on shipping cost to France ...


never sent anything to France, but it shouldn't be a problem.

mas, bonjour, como ca va? (exhausting my high school french)

[Nobody]

Yeah I could use one for me Emag. I'm pretty sure it's angel threaded.


if you have a n ULE body, or Tac body, then its angel threaded.

[river031403]

I couldn't find it on the Gearheadz site, where is it?
Black derlin in cocker pics->It's a little tall at the moment but it's only derlin so I will cut it down to get it tighter/ lower profile.Old angel threaded feedneck cut down for my pistol project-->>As far as angel threaded adapters I have one on its way that a friend did for me
http://i1083.photobucket.com/albums/j381/river031403/4D80D974-6450-4E5A-B75F-1EC14D553754_zpsncrhjpoc.jpg (http://s1083.photobucket.com/user/river031403/media/4D80D974-6450-4E5A-B75F-1EC14D553754_zpsncrhjpoc.jpg.html)
http://i1083.photobucket.com/albums/j381/river031403/7AA591D7-F45B-450D-A2D0-EC40B889C7B5_zps19aoguvy.jpg (http://s1083.photobucket.com/user/river031403/media/7AA591D7-F45B-450D-A2D0-EC40B889C7B5_zps19aoguvy.jpg.html)

http://gearheadzpb.com/index.php?option=com_rokecwid&view=ecwid&Itemid=118#!/~/product/category=3025012&id=17530676
It's just an adapter that goes into any clamping feedneck and allows you to use empire springfeed
http://i1083.photobucket.com/albums/j381/river031403/AD14F1A4-9316-499C-8FE6-9A1FD013F02A_zpshflyful4.jpg (http://s1083.photobucket.com/user/river031403/media/AD14F1A4-9316-499C-8FE6-9A1FD013F02A_zpshflyful4.jpg.html)
http://i1083.photobucket.com/albums/j381/river031403/C436FEAA-0E97-402E-A451-7D6399BF6E5A_zpswzln0uss.jpg (http://s1083.photobucket.com/user/river031403/media/C436FEAA-0E97-402E-A451-7D6399BF6E5A_zpswzln0uss.jpg.html)
http://i1083.photobucket.com/albums/j381/river031403/79CF24A9-2BAF-42DC-9A89-0256581AE001_zps9qqvaoc9.jpg (http://s1083.photobucket.com/user/river031403/media/79CF24A9-2BAF-42DC-9A89-0256581AE001_zps9qqvaoc9.jpg.html)

[Menace_AO]

I know what he is up to and I approve!

Seconded! :D

[PyroFiend]

I'm pretty sure it's ULE. Picked it up....5-6 years ago and it sat for a while so I don't really remember.
I haven't seen a body like it since.

There should be a picture attached.

[maverick13]

never sent anything to France, but it shouldn't be a problem.

mas, bonjour, como ca va? (exhausting my high school french)

Your french is still good !

[Nobody]

I'm pretty sure it's ULE. Picked it up....5-6 years ago and it sat for a while so I don't really remember.
I haven't seen a body like it since.

There should be a picture attached.

that's not a ULE body, that's an IT body. much better in the looks(for some). it should be angel threaded.

if for any reason it isn't, i'll give a full refund of the parts.

[Nobody]

Your french is still good !

well, i do talk to la Quebec when they come down. i can give minor directions and count out their money.

so, bon soire.

[PyroFiend]

I still want one. :)
I can put it to other use on future bit-o-mags I have in boxes if it doesn't work out for this purpose.

IT body...thanks!

[river031403]

Bump moving forward?

[Nobody]

Bump moving forward?

nothing from the supplier yet. i think with Kee shutting down made smaller orders like mine, get buried. i'll check back with them this week and see where they are. hopefully, i should have them ready to ship by March 3rd.