OPBN
02-07-2014, 11:18 AM
Here's mine. Will add more info as I find time/motivation.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8802_zps482b8a93.jpg
My workhorse. Took a couple of years of tuning, but it now shoots ropes with the slight tickle of the trigger. Sadly it actually doesn't see much field time these days as I have been primarily been earning my chops playing pump.
Mods:
Chopped and CF modded ULE body with dual detents and A+ feedneck (I think)
To be perfectly honest, I can't remember the name of the trigger. Think it may be RPG? Has set screws.
X Valve has ULT.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8803_zpsac30010c.jpg
I should name this one "Money Pit". Granted, it's not on the level of Bunny Money, but I have much more into this thing than I will ever probably admit to. Sad part is, it has NEVER seen the field since completion. Shot a hopper or two through it in the back yard, but that's it.
Mods:
Body is Shortened, dual detented and lower wings shaved.
Rail has been milled to death. Wings milled, back milled, custom ULE milled, Side holes milled out. Probably have $150 just in milling done to this thing. Custom E-Tac jewels
Milled ULE Emag frame with X mod. Someone had drilled a hole for a switch so had it milled to get rid of it. Lukes trigger. Older Lukes panels. Custom milled battery box.
Freak bored barrel
http://i307.photobucket.com/albums/nn308/oldpbnoob/dallaramag001.jpg
Probably my most prized Mag. No it's not for sale. Finally won MOTM after 2-3 tries.
Specs:
Dallara body and rail. Oddly, one of only a couple that were cocker threaded for detents.
Sleeper Pneud M90 frame. Mods done by Loguzzzz.
Lukes foregrip custom tapped on the bottom to better hide the fitting
Mike780 G-10 panels
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8804_zpsddbe9925.jpg
MM2K9. Everything on this was literally brand new excepting barrel.
Specs:
PTP MM2K9 body. Yes it reaches 300fps!
VER frame
RPG Gas through
BL Gear Drive On/Off
AKA feedneck
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8805_zpse14d35aa.jpg
My first pump mag in its 3rd rendition. Was a MOTM winner prior to frame and body swap. This has been essentially the only marker I have used in the past 1.5 years excepting the 15 minutes or so I played with my nemesis below...
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8806_zps29eead45.jpg
I love to hate this marker....
Mods:
Cut, dual detented ULE body
Prototype Lukes Featherlite rail. Accepts RTP style sear with drop in pin. 1 of 1.
Sleeper modded Chimera frame. The pnues on this have given me fits on and off for a long time. I finally took out the twister lpr and put a Microrock in that proceeded to leak out of every orifice. Seems to actually be working now.
Capped and external reg'd valve
Old style AKA sidewinder.
Mike780 G-10 panels.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8807_zpsbb40d97d.jpg
I keep holding onto this one. Not sure why. More or less a potential loaner. Just can't bring myself to sell it yet.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8808_zps71dcb76d.jpg
One of two current pump projects.
http://i307.photobucket.com/albums/nn308/oldpbnoob/photo3_zps1c6ba7f7.jpg
Second of two current pump projects.
http://i307.photobucket.com/albums/nn308/oldpbnoob/sniperpanelpoll001.jpg
My sol0 WGP marker. Pieced this together as a lesson in building a sniper. Again, has never actually seen the field since built.
http://i307.photobucket.com/albums/nn308/oldpbnoob/groupcontest_zpsf6ab1b0b.jpg
Familyish photo. This group won the one and only "group MOTM" contest.
Yes, there is a lot of silver and black.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8802_zps482b8a93.jpg
My workhorse. Took a couple of years of tuning, but it now shoots ropes with the slight tickle of the trigger. Sadly it actually doesn't see much field time these days as I have been primarily been earning my chops playing pump.
Mods:
Chopped and CF modded ULE body with dual detents and A+ feedneck (I think)
To be perfectly honest, I can't remember the name of the trigger. Think it may be RPG? Has set screws.
X Valve has ULT.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8803_zpsac30010c.jpg
I should name this one "Money Pit". Granted, it's not on the level of Bunny Money, but I have much more into this thing than I will ever probably admit to. Sad part is, it has NEVER seen the field since completion. Shot a hopper or two through it in the back yard, but that's it.
Mods:
Body is Shortened, dual detented and lower wings shaved.
Rail has been milled to death. Wings milled, back milled, custom ULE milled, Side holes milled out. Probably have $150 just in milling done to this thing. Custom E-Tac jewels
Milled ULE Emag frame with X mod. Someone had drilled a hole for a switch so had it milled to get rid of it. Lukes trigger. Older Lukes panels. Custom milled battery box.
Freak bored barrel
http://i307.photobucket.com/albums/nn308/oldpbnoob/dallaramag001.jpg
Probably my most prized Mag. No it's not for sale. Finally won MOTM after 2-3 tries.
Specs:
Dallara body and rail. Oddly, one of only a couple that were cocker threaded for detents.
Sleeper Pneud M90 frame. Mods done by Loguzzzz.
Lukes foregrip custom tapped on the bottom to better hide the fitting
Mike780 G-10 panels
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8804_zpsddbe9925.jpg
MM2K9. Everything on this was literally brand new excepting barrel.
Specs:
PTP MM2K9 body. Yes it reaches 300fps!
VER frame
RPG Gas through
BL Gear Drive On/Off
AKA feedneck
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8805_zpse14d35aa.jpg
My first pump mag in its 3rd rendition. Was a MOTM winner prior to frame and body swap. This has been essentially the only marker I have used in the past 1.5 years excepting the 15 minutes or so I played with my nemesis below...
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8806_zps29eead45.jpg
I love to hate this marker....
Mods:
Cut, dual detented ULE body
Prototype Lukes Featherlite rail. Accepts RTP style sear with drop in pin. 1 of 1.
Sleeper modded Chimera frame. The pnues on this have given me fits on and off for a long time. I finally took out the twister lpr and put a Microrock in that proceeded to leak out of every orifice. Seems to actually be working now.
Capped and external reg'd valve
Old style AKA sidewinder.
Mike780 G-10 panels.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8807_zpsbb40d97d.jpg
I keep holding onto this one. Not sure why. More or less a potential loaner. Just can't bring myself to sell it yet.
http://i307.photobucket.com/albums/nn308/oldpbnoob/DSCN8808_zps71dcb76d.jpg
One of two current pump projects.
http://i307.photobucket.com/albums/nn308/oldpbnoob/photo3_zps1c6ba7f7.jpg
Second of two current pump projects.
http://i307.photobucket.com/albums/nn308/oldpbnoob/sniperpanelpoll001.jpg
My sol0 WGP marker. Pieced this together as a lesson in building a sniper. Again, has never actually seen the field since built.
http://i307.photobucket.com/albums/nn308/oldpbnoob/groupcontest_zpsf6ab1b0b.jpg
Familyish photo. This group won the one and only "group MOTM" contest.
Yes, there is a lot of silver and black.