more warp feed advice needed

[vintage]

whats a good asa to use on an rt classic? the only way a duck bill will fit is if I clearance cut it. i'm going to be using remote air so I only need the asa as a shoulder stock adapter anyway, just wondered if there was an easy, cheap way to do this. my first attempt at dremeling a revy shell failed miserably, i'll have to be more careful with the next one.

[wetwrks]

Would one of Luke's angled (offset) Asa adapters help?

http://i177.photobucket.com/albums/w214/wetwrks/36bdd236225086c757bd1edbc78f50f8.jpg

http://i177.photobucket.com/albums/w214/wetwrks/bf565de8a99aaad6adc00e575f38e9b4.jpg

[Cyco-Dude]

whats a good asa to use on an rt classic?.
any rail-mounted asa or on/off asa should be fine. as for standard asas, i really like these (http://www.tunamart.com/index.php?c=27&p=131). it's angled down so you have the correct rise, and more under the grip so the fitting is not digging into your wrist.

[Fred]

If you're using a remote but want a shoulder contact patch... use any ASA + a gas thru stock...

If you're looking for something a little snazzier, try a Dock Nickel P-stock!

[vintage]

i need an asa that will clear the warp feed bracket without modification.