Cyco-Dude
07-17-2014, 06:24 PM
alright, i've got a black ule body that i'd like to trade for a red ule body. stock or no feedneck is fine; dust or gloss black ccm no-rise feedneck with gloss red clamp (or red anno neck with black clamp) would be ideal though. click the pics for full resolution.
https://lh6.googleusercontent.com/-ibWqSiE-txw/U8hYRmFvj1I/AAAAAAAAAlc/Zbn0bu-evOo/s800/black_ule_right.JPG (https://lh6.googleusercontent.com/-ibWqSiE-txw/U8hYRmFvj1I/AAAAAAAAAlc/Zbn0bu-evOo/s1600/black_ule_right.JPG)
https://lh4.googleusercontent.com/-vM8jsR5VYZk/U8hYR_RUchI/AAAAAAAAAlk/Q0iyetR6AJU/s800/black_ule_left.JPG (https://lh4.googleusercontent.com/-vM8jsR5VYZk/U8hYR_RUchI/AAAAAAAAAlk/Q0iyetR6AJU/s1600/black_ule_left.JPG)
it's not flawless, but decent used condition. most of the scuffs are on the feedneck, and front-left part of the body.
https://lh5.googleusercontent.com/-lFri-_K4dL0/U8hYSj9mpMI/AAAAAAAAAlw/lBfloDKSXAI/s800/black_ule_neck.JPG (https://lh5.googleusercontent.com/-lFri-_K4dL0/U8hYSj9mpMI/AAAAAAAAAlw/lBfloDKSXAI/s1600/black_ule_neck.JPG)
https://lh4.googleusercontent.com/-_FZGSrddxrU/U8hYSaCa__I/AAAAAAAAAls/QHfeaUCjuKI/s800/black_ule_front.JPG (https://lh4.googleusercontent.com/-_FZGSrddxrU/U8hYSaCa__I/AAAAAAAAAls/QHfeaUCjuKI/s1600/black_ule_front.JPG)
the detent was screwed in too far by the previous owner and got smacked by the bolt, apparently. i've demeled out the portion of the housing that was dented in, and cleaned up the threads. i've installed an o-ring at the base of the detent to prevent it from being screwed in too far and having this happen again in the future. it screws smoothly into the body, and functions as it should.
https://lh3.googleusercontent.com/-T41b6cm29CQ/U8hYTeBtCqI/AAAAAAAAAl4/1D9E4Todi4Y/s800/detent.JPG (https://lh3.googleusercontent.com/-T41b6cm29CQ/U8hYTeBtCqI/AAAAAAAAAl4/1D9E4Todi4Y/s1600/detent.JPG)
https://lh5.googleusercontent.com/-0eHuqY114F0/U8hYT1Y5q6I/AAAAAAAAAmE/8UE3bVC0WZ4/s800/detent_threads.JPG (https://lh5.googleusercontent.com/-0eHuqY114F0/U8hYT1Y5q6I/AAAAAAAAAmE/8UE3bVC0WZ4/s1600/detent_threads.JPG)
https://lh5.googleusercontent.com/-QsMs_IE7WP4/U8hYUCAEkNI/AAAAAAAAAmI/3UNoxw7Z60M/s800/detent_ball.JPG (https://lh5.googleusercontent.com/-QsMs_IE7WP4/U8hYUCAEkNI/AAAAAAAAAmI/3UNoxw7Z60M/s1600/detent_ball.JPG)
any takers? better condition, i'll add. no-rise ccm feedneck that i want i'll add. otherwise it's a straight swap. lemme know, thanks!
https://lh6.googleusercontent.com/-ibWqSiE-txw/U8hYRmFvj1I/AAAAAAAAAlc/Zbn0bu-evOo/s800/black_ule_right.JPG (https://lh6.googleusercontent.com/-ibWqSiE-txw/U8hYRmFvj1I/AAAAAAAAAlc/Zbn0bu-evOo/s1600/black_ule_right.JPG)
https://lh4.googleusercontent.com/-vM8jsR5VYZk/U8hYR_RUchI/AAAAAAAAAlk/Q0iyetR6AJU/s800/black_ule_left.JPG (https://lh4.googleusercontent.com/-vM8jsR5VYZk/U8hYR_RUchI/AAAAAAAAAlk/Q0iyetR6AJU/s1600/black_ule_left.JPG)
it's not flawless, but decent used condition. most of the scuffs are on the feedneck, and front-left part of the body.
https://lh5.googleusercontent.com/-lFri-_K4dL0/U8hYSj9mpMI/AAAAAAAAAlw/lBfloDKSXAI/s800/black_ule_neck.JPG (https://lh5.googleusercontent.com/-lFri-_K4dL0/U8hYSj9mpMI/AAAAAAAAAlw/lBfloDKSXAI/s1600/black_ule_neck.JPG)
https://lh4.googleusercontent.com/-_FZGSrddxrU/U8hYSaCa__I/AAAAAAAAAls/QHfeaUCjuKI/s800/black_ule_front.JPG (https://lh4.googleusercontent.com/-_FZGSrddxrU/U8hYSaCa__I/AAAAAAAAAls/QHfeaUCjuKI/s1600/black_ule_front.JPG)
the detent was screwed in too far by the previous owner and got smacked by the bolt, apparently. i've demeled out the portion of the housing that was dented in, and cleaned up the threads. i've installed an o-ring at the base of the detent to prevent it from being screwed in too far and having this happen again in the future. it screws smoothly into the body, and functions as it should.
https://lh3.googleusercontent.com/-T41b6cm29CQ/U8hYTeBtCqI/AAAAAAAAAl4/1D9E4Todi4Y/s800/detent.JPG (https://lh3.googleusercontent.com/-T41b6cm29CQ/U8hYTeBtCqI/AAAAAAAAAl4/1D9E4Todi4Y/s1600/detent.JPG)
https://lh5.googleusercontent.com/-0eHuqY114F0/U8hYT1Y5q6I/AAAAAAAAAmE/8UE3bVC0WZ4/s800/detent_threads.JPG (https://lh5.googleusercontent.com/-0eHuqY114F0/U8hYT1Y5q6I/AAAAAAAAAmE/8UE3bVC0WZ4/s1600/detent_threads.JPG)
https://lh5.googleusercontent.com/-QsMs_IE7WP4/U8hYUCAEkNI/AAAAAAAAAmI/3UNoxw7Z60M/s800/detent_ball.JPG (https://lh5.googleusercontent.com/-QsMs_IE7WP4/U8hYUCAEkNI/AAAAAAAAAmI/3UNoxw7Z60M/s1600/detent_ball.JPG)
any takers? better condition, i'll add. no-rise ccm feedneck that i want i'll add. otherwise it's a straight swap. lemme know, thanks!