View Full Version : Master list? in one post?
Runamok
09-23-2014, 03:41 AM
Hey guy's,
What do you think about assembling a Master list of Resources and sizes for SS or Alum. screws and other parts for Mags. Your one stop shopping source. I have a feeling these are scattered all over the place so we'd just tighten it up abit.
My contribution: http://www.mcmaster.com/library/20140331/90666a016l.gif , SS AM fore grip screw. Pkg. of 5 @ $1.48 ea., and you'll notice they're SS.
Sounds good. Finding that stuff here in Europe is pretty painful considering the rest of the world outside US and Britain use metric system.
Chrome
09-23-2014, 06:13 PM
Here is a list that I've put together over time from various posts on AO. Hope this gets you off to a good start.
AUTOMAG SCREWS:
GRIP FRAME to RAIL - 10-32 .968 with .865 threaded, 1" with a washer or cut down (7/8" OAL without washer)
AM/MM VERT ASA - 1/4-20-1/2"
GRIP, ASA - 10-32-various length
SAFETY ASSEMBLY BALL BEARING - 3/32" diameter
SAFETY SPRING - 7+1 coils, closed end, 6 spaces, OAL=0.240" wire dia.=0.015" space between coils=0.0225"
SAFEY SET SCREW - #4/40 no longer than 1/8"
EMAG SELECTOR SWITCH SPRING - 8+1 coils, closed end 7 spaces, OAL=0.330", wire dia.=0.015", space between coils=0.03"
EMAG GRIP SCREW - 6-32 x 1/4"
EMAG SCREEN DIGIKEY PART NUMBERS
HCMS-2912 for Red
HCMS-2911 for Yellow
HCMS-2913 for Green
HCMS-2914 for Orange
Runamok
09-24-2014, 02:21 AM
Now we're getting into it. See Chrome gave us nice Tech. on the springs. Useful info for ordering. Another tid bit, I found that old Quick disconnects use the same bearing as the safety, and the flint spring from a bic lighter is the right size for the safety, just cut it down and use a small pair of needle nose pliers to finish the ends. We've all dropped them and I think few of them have ever been found again. The foregrip screw is indeed a 1/4-20 x 1/2" the killer is it's a "low-profile socket head". The pic/desc. at mcmaster.com even gives all the tech. spec.s
Found it: wave spring for pump, www.smalley.com pn.c100-m1
Wave springs from UK/Europe can be ordered from here.
http://www.leespring.com/uk_wave_springs_spec.asp?springType=WS&forWhat=Search
I'll dig up the specific link to the spring once I get home.
edit:
these http://www.leespring.com/uk_product_spec.asp?partnum=LW100180250S&springType=WS
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.