PDA

View Full Version : Something a little different, XMT CF, Nummech, reversed



fz6soldier
12-13-2014, 01:11 AM
So this is my latest build, still may anno the rail to match the frame. I really like the way it came out and how comfortable it is. Believe it or not the frame required almost no modification, just drill the mounting holes a little bigger and adjust the trigger rod. This thing shoots amazing. It's really easy to Rt or single shot. I see potential for these Nummech frames to be modded for pneumatics.

bowcycle
12-13-2014, 02:24 AM
that's really sweet. amazing how well everything lines up.
nice job!

Laku
12-13-2014, 03:48 AM
Really nice! Great work!

Is it missing macro to the valve, or is it some how hidden in there?

Frizzle Fry
12-13-2014, 08:38 AM
It's on the drivers side.

Laku
12-13-2014, 09:06 AM
:tard: So it is. Some how missed it while looking it from my phone.

fz6soldier
12-13-2014, 11:13 AM
thanks! I wasn't sure how this was going to work. i tried a few rails before deciding on this one.

capt spank
12-15-2014, 04:02 PM
I love this. Entirely mechanical right? Is that an rt length or am/mm length rail. Hard to tell on my phone.

capt spank
12-15-2014, 04:09 PM
Also what did you do in terms of the reg or on off?

fz6soldier
12-15-2014, 04:30 PM
Also what did you do in terms of the reg or on off?

Yes, all Mechanical. I tried a am/mm rail at first and didn't like the way it looked. So I went with the Lukes RT length Zayan rail, fits perfect. I'm just running a RT on/off in it right now. The reg is a Planet Eclipse OOPS which worked perfect because I need a an ASA that fits a T-slot and has the fitting on the left. I did have to grind a bit of the ASA rail because the ASA wouldn't slide in all the way, but it's good now. I was suprised at how it aired up and worked great on the first assembly.

capt spank
12-15-2014, 04:47 PM
Yes, all Mechanical. I tried a am/mm rail at first and didn't like the way it looked. So I went with the Lukes RT length Zayan rail, fits perfect. I'm just running a RT on/off in it right now. The reg is a Planet Eclipse OOPS which worked perfect because I need a an ASA that fits a T-slot and has the fitting on the left. I did have to grind a bit of the ASA rail because the ASA wouldn't slide in all the way, but it's good now. I was suprised at how it aired up and worked great on the first assembly.

the oops is what i meant by on/off. can you take a closer picture and maybe show what it looks like inside the frame? the axe/min reg/onoffs install a lot differently than any other i've seen. so i can't quite picture in my head what you did to get it onto the frame.

fz6soldier
12-15-2014, 06:13 PM
the oops is what i meant by on/off. can you take a closer picture and maybe show what it looks like inside the frame? the axe/min reg/onoffs install a lot differently than any other i've seen. so i can't quite picture in my head what you did to get it onto the frame.

I had to round off the back of the rail to make it fit flush on the frame. Then just slide it in the T-slot and tighten the two screws. let me know if you have anymore questions.

NU_METAL
12-15-2014, 10:33 PM
Love it ! Nice build dude !

fz6soldier
12-15-2014, 10:41 PM
Thanks! It's the first mag I built from scratch.

zulubravo44
12-16-2014, 09:44 AM
Did you weigh it yet? It looks light as can be.

ScottyBeans
12-16-2014, 10:27 AM
very unique. Looks like it's going to be real fun to play with

fz6soldier
12-16-2014, 03:04 PM
Did you weigh it yet? It looks light as can be.

Not yet, I will when I get home. Thinking about putting a DW whip tip on the Stella barrel, so it may get lighter.

djinnform
01-02-2015, 03:06 PM
any more internal pics, of your drill holes etc? thank you

Stedspitcher
01-03-2015, 05:49 PM
Very Interesting, Nice Job!

fz6soldier
01-07-2015, 07:56 PM
sorry, haven't been in this thread lately. I'll try to get some pics up.