specs or CAD file for X-Mag frame

[flampaint]

as stated above, I am looking for the exact specs on the milling on the top part of an X-Mag Frame or even better: the CAD file for the X-Mag Frame

This is due to the fact that I have a (IMHO) very nice looking X-Mag with matching anno done by Caustic.
The problem is: it's not really an X-Mag because it has an E-Mag frame (but a EuroMag "X-Mag" Body). I know... :tard:
I would therefore like to have the frame milled in order to make space for an ACE board, get the specs for the hole for the adjustment of the potentiometer and also the hole and thread for the screw that holds down the ACE board.

I know and realize the request sounds pretty dumb, as I could just get a new X-Mag frame, the problem is, that it is a custom ano job by Caustic and I’m not sure he’d be able to ano another frame that exact same way… And before anyone asks: yes it matters to me if it has an ACE Board or not (even if it doesn't get used, due to it having a LVL10 bolt) - it's more of a collector's item which I'd like to have as a "true" X-Mag and not as wannabe X-Mag... :D

Thanks a lot in advance fro any help or pointers with this!:headbang:

[captian pinky]

just to be clear you want to mill an already annoed body so it can have the ace? or is it going to be annoed post milling?

[flampaint]

just to be clear you want to mill an already annoed body so it can have the ace? or is it going to be annoed post milling?

it is already annoed and the plan is to have it milled with no post milling ano. Since the miling to make place for the ACE would only have to be done on the top part (which sits flush to the body), the ano shouldn't get any visible damage/blemishes when the marker's assembled.

[Tunaman]

Any ULE Emag frame will have the milling and be the same

[flampaint]

Any ULE Emag frame will have the milling and be the same

unfortunately my Emag frame isn't a ULE... :( are there specs/CAD files "just" for the ULE milling in that case?

[Mole1119]

I am not sure I would say that you don't have an X-mag. I am definitely not a Euro X expert but you may want to take a look at this:
http://xmagworld.com/2012/12/22/the-std/

Bunny could probably give the best history.

From what I gather the Euro X could have come with either standard or ULE lowers. I am not exactly sure what the ace harness looked like.

Either way I don't think you could truly convert standard lowers to ULE lowers with out having milling showing, rear hump, area in the trigger guard. If you just want an ACE slot than I get where you are coming from.

Do you have an ACE board to put in it?
Either way I think if you like the way it shoots than I would enjoy it, and if you really want ULE Lowers it may be worth asking if Caustic can match a frame.

Les see a picture of the gun :D

(PS I have never seen ULE Lowers CAD Files published)

[flampaint]

I am not sure I would say that you don't have an X-mag. I am definitely not a Euro X expert but you may want to take a look at this:
http://xmagworld.com/2012/12/22/the-std/

Bunny could probably give the best history.

From what I gather the Euro X could have come with either standard or ULE lowers. I am not exactly sure what the ace harness looked like.

Either way I don't think you could truly convert standard lowers to ULE lowers with out having milling showing, rear hump, area in the trigger guard. If you just want an ACE slot than I get where you are coming from.

Do you have an ACE board to put in it?
Either way I think if you like the way it shoots than I would enjoy it, and if you really want ULE Lowers it may be worth asking if Caustic can match a frame.

Les see a picture of the gun :D

(PS I have never seen ULE Lowers CAD Files published)

yes, I basically "just" want an ACE slot so that I can hook an ACE to the board...

[Mole1119]

I would check with Luke or Xmagterror to see if they can do what you need.

Here are a couple old links that may be of use digging into deeper, the first one has some drawings, not sure the accuracy. Good luck

http://www.automags.org/forums/showthread.php?226906-ACE-board-in-Emag-I-need-specs
http://www.automags.org/forums/showthread.php?259392-E-mag-Frame-Body-Rail-ACE-milling

[flampaint]

I would check with Luke or Xmagterror to see if they can do what you need.

Here are a couple old links that may be of use digging into deeper, the first one has some drawings, not sure the accuracy. Good luck

http://www.automags.org/forums/showthread.php?226906-ACE-board-in-Emag-I-need-specs
http://www.automags.org/forums/showthread.php?259392-E-mag-Frame-Body-Rail-ACE-milling

already on that path - thanks! :headbang:

[flampaint]

done - My Euro Xmag now also has an ACE on it! :headbang:
Thanks a lot to Tuna and XMT!

90977