pb.brandon
02-23-2015, 03:31 PM
Okay i have a bit of questions so hang in there while I try to explain. I have a automag with a LVL 10 xvalve running a ULT trigger. I have my air running from the ASA straight to the valve. My air system is a 68/4500 with a 2013 ninja SHP regulator. I'm runnin 5 shims in the valve itself and all the shims in the air tank regulator.
So when I'm shooting, after about 3 shots the bolt will stick. When I say stick the gun will not fire and it feels as if the bolt doesn't reset.. After trying a couple different things such as turning off the air and turning it back on the bolt will reset but after a couple more shots it will stick again. I will also try "tapping" the side of the gun where the bolt is just behind the feed neck to hopefully reset the marker and that will work rarely.
Also when I put my air tank on the gun and then turn on my air on the bottom of the gun, it is damn near impossible to fully tighten down the on/off nob. (I like to tighten down and then quarter turn back to get a good airflow)
Next problem; after I get the air tightened down correctly I will go shoot the marker over the chrono and the gun shoots but the paintball goes maybe 4 feet then the next shot chromosome at 165 then the ball falls out on the 3rd shot and the next shot chrono a at 275 and the next 3 chrono at over 325 and then back to the paintball going 4 feet and sometimes it won't even push the ball out.
I also hear a small..SMALL leak coming from elbow on the valve that connects the ASA line. I have taken the elbow off and put Teflon tape around to tighten the seal bt still there is a leak.
Now for the final problem... When my gun was going through all this, my buddy loaned me his marker to go play and while I was on the field him self he took it upon him self to see if lube would help the gun. Yes monkey poo lube. He put lube on the bolt and bolt spring and all that external parts connected to the valve. What do I need to do to make sure there is no lube inside of the valve itself and if there is lube what is the worst to happen and what can I expect to happen since there may be lube inside the valve.
Please help me as to I've had my valve serviced from the original owner 3 times and still nothing works correctly.
So when I'm shooting, after about 3 shots the bolt will stick. When I say stick the gun will not fire and it feels as if the bolt doesn't reset.. After trying a couple different things such as turning off the air and turning it back on the bolt will reset but after a couple more shots it will stick again. I will also try "tapping" the side of the gun where the bolt is just behind the feed neck to hopefully reset the marker and that will work rarely.
Also when I put my air tank on the gun and then turn on my air on the bottom of the gun, it is damn near impossible to fully tighten down the on/off nob. (I like to tighten down and then quarter turn back to get a good airflow)
Next problem; after I get the air tightened down correctly I will go shoot the marker over the chrono and the gun shoots but the paintball goes maybe 4 feet then the next shot chromosome at 165 then the ball falls out on the 3rd shot and the next shot chrono a at 275 and the next 3 chrono at over 325 and then back to the paintball going 4 feet and sometimes it won't even push the ball out.
I also hear a small..SMALL leak coming from elbow on the valve that connects the ASA line. I have taken the elbow off and put Teflon tape around to tighten the seal bt still there is a leak.
Now for the final problem... When my gun was going through all this, my buddy loaned me his marker to go play and while I was on the field him self he took it upon him self to see if lube would help the gun. Yes monkey poo lube. He put lube on the bolt and bolt spring and all that external parts connected to the valve. What do I need to do to make sure there is no lube inside of the valve itself and if there is lube what is the worst to happen and what can I expect to happen since there may be lube inside the valve.
Please help me as to I've had my valve serviced from the original owner 3 times and still nothing works correctly.