View Full Version : Tank Talk
Pump&Run
05-08-2015, 04:15 AM
Just wondering what everyone are using for tanks ( brand , model, size) and pressure settings to run their guns.
Syko89
05-08-2015, 04:50 AM
Ninja sl 68 and 90 both 850psi output
Nobody
05-08-2015, 05:32 AM
Crossfire red hp 68/4500 and now a Stella barrel kit. Old barrels ranged from Lapcos, freaks, Dye UL, freaked Dye 1 piece aluminium.
BLachance75
05-08-2015, 05:52 AM
I use have a 68/4500 Crossfire tank with a Ninja Pro v2 reg outputting 800psi and a Gorrilla Air 88/4500 tank with a Ninja Pro v2 SHP outputting 950psi
Grelvire
05-08-2015, 06:07 AM
68/4500 with a Armageddon reg
going_home
05-08-2015, 06:15 AM
Ninja SL 68 SLP and Ninja SL 90 SHP.
;)
OneSelfLost
05-08-2015, 06:38 AM
Ninja 50/4500 peanut, 950 psi output
capt spank
05-08-2015, 07:44 AM
3 ninja sl tanks of varying size.
Cyco-Dude
05-08-2015, 07:58 AM
everything...800-950 psi. ninja adjustable, ninja shp pro v2, older tanks, sl tanks, air america apocalypse and armageddon 2k regs.
zulubravo44
05-08-2015, 08:24 AM
Ninja sl 68.... 850psi output
Me too. Best tank there is, in my opinion.
Dayspring
05-08-2015, 08:26 AM
Oddball tanks (68 & 72ci) with a Ninja reg and Ninja Pro V2 - both set to 850.
skipdogg
05-08-2015, 08:34 AM
ninja tanks at 850psi
keiko_819
05-08-2015, 11:12 AM
50/4500 ninja with about 850 output
sjrtk
05-08-2015, 11:48 AM
68 Crossfire 850 preset, 70 Crossfire Peanut 850 also, and a 45 Crossfire 700 Satan Parts reg on the pump gun.
Spider-TW
05-08-2015, 01:05 PM
old 68 crossfire 850, ninja 45/45 650, ninja reg'ed 17/3k 650, 68 ninja SHP 950.
The 650's work fine on regular classic mags and pump mags, and efficient electros (and an ICD alley cat :confused:). Both 68 tanks are on their last hydro, so there's one or two ninja SL tanks coming up for me.
blackdeath1k
05-08-2015, 02:07 PM
68 Carlton tank with a ninja pro v2 shp outputting 950. Wife is running an old crossfire outputting 850
SpyderBoy
05-08-2015, 03:54 PM
68 Guerrilla Air 4500 tank with Ninja SHP reg set to 1100psi
70 Guerrilla Air 4500 tank with Ninja SHP reg set to 1150psi
I also have a Myth 2 reg that I can swap out which is set to 850psi.
Pump&Run
05-08-2015, 07:28 PM
I thought the regular ninjas only went to 800... So are these 850 settings on shp's or just shimmed normal valves?
WholemealDrop
05-08-2015, 11:18 PM
Few different tanks, mosting GA and Crossfire with either GA Myth regs or Crossfire regs. Standard 850PSI output on all of them. Ninja SLs are on my list along with a SHP reg to buy down the road.
ninjapaintball
05-09-2015, 05:48 AM
I Use a 45/4500 ninja but also have an sl 68/4500
Nobody
05-09-2015, 06:01 AM
I Use a 45/4500 ninja but also have an sl 68/4500
Now it would be funny if you wrote that you had some old Centerflag regs, cause they were great & waiting for them to die before getting something new.
ninjapaintball
05-09-2015, 06:08 AM
My first system was a center flag hyper flow but that was 15 years ago
BigEvil
05-09-2015, 09:18 AM
My first system was a center flag hyper flow but that was 15 years ago
Still IMO the best reg ever made. I have several. I am going to cry when I run out of reg seats :(
UncleStasiu
05-09-2015, 07:59 PM
Still IMO the best reg ever made. I have several. I am going to cry when I run out of reg seats :(
Ditto. For now, I'm just happy the seats aren't like AA's and don't have to be replaced when you open the reg up.
On non-mags: 2 MacDev Conquests
On mags: Centerflag Thunder, Air America Apocalypse 2k
In the wings: 3 Centerflag Dynaflows (each one apparently a different vintage), Centerflag Hyperflow, Ninja standard 4500 (current version with ball pin and double o-rings)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.