Tachiro
05-16-2015, 07:36 PM
After a good deal of scouring that ULT sticky, i'm still having a bit of trouble...troubleshooting this leak. Not sure how/where to start, but let's go with the setup:
Micromag body
Classic valve
level 7 bolt
Here's a list of unsorted details/factors:
- the stock on/off functions fine with no leaks
- i'm waiting on an mpa-3 to finish the pneumag frame i'm working on separately. But for now i've got the stock cf frame on to tune the ULT
Here's a list of shim results:
0 shims: no leak, doesn't fire
1 shim: no leak, doesn't fire
4 shims: no leak, doesn't fire
5 shims: soft leak, chuffs i guess but doesn't actually fire, no leaks when the trigger is pulled
6 shims: leaks, fires, chuffs at higher rof than 3-4 bps, no leaks when the trigger is pulled
8 shims: leaks, fires reliably, no leaks when trigger is pulled
9 shims: on/off protrudes too much to slide into mag body
Anyone know what i should do next?
FYI:
i also happen to have an RT on/off here for reference.
Random thought:
I tried an experiment with the stock on/off installed. I pointed the marker upwards and hung a bag over the trigger, then slowly put little weights in until it fired. I put the bag on a scale afterward and it came out to about 7lbs. I forgot why i wanted to mention that. I'm sure it'll be of use to someone eventually.
Micromag body
Classic valve
level 7 bolt
Here's a list of unsorted details/factors:
- the stock on/off functions fine with no leaks
- i'm waiting on an mpa-3 to finish the pneumag frame i'm working on separately. But for now i've got the stock cf frame on to tune the ULT
Here's a list of shim results:
0 shims: no leak, doesn't fire
1 shim: no leak, doesn't fire
4 shims: no leak, doesn't fire
5 shims: soft leak, chuffs i guess but doesn't actually fire, no leaks when the trigger is pulled
6 shims: leaks, fires, chuffs at higher rof than 3-4 bps, no leaks when the trigger is pulled
8 shims: leaks, fires reliably, no leaks when trigger is pulled
9 shims: on/off protrudes too much to slide into mag body
Anyone know what i should do next?
FYI:
i also happen to have an RT on/off here for reference.
Random thought:
I tried an experiment with the stock on/off installed. I pointed the marker upwards and hung a bag over the trigger, then slowly put little weights in until it fired. I put the bag on a scale afterward and it came out to about 7lbs. I forgot why i wanted to mention that. I'm sure it'll be of use to someone eventually.