PDA

View Full Version : Choppin Ballz


Minimagyomama
02-26-2002, 06:20 PM
Hey I'm choppin balls like nobodies buisness!!!
I tried different barrels and it still does it!!!
the velocity isn't too hi!

I fire slow.. i just dont know?
any ideas!!

97 Minimag
10" 32 DegreesCarbon Fiber Barrel
12" J&J ceramic barrel
AA Blackice regulator
SystemX on/off dropforward
68ci 3000pis
3357 spotmarker(backup marker)
TKO Automag 68
02-26-2002, 06:22 PM
get a new foamie if u have one
Minimagyomama
02-26-2002, 06:33 PM
WEll i have a foamless bolt.. i guess i should buy i foamie bolt??



97 Minimag
10" 32 DegreesCarbon Fiber Barrel
12" J&J ceramic barrel
AA Blackice regulator
SystemX on/off dropforward
68ci 3000pis
3357 spotmarker(backup marker)
2UnREal
02-26-2002, 06:36 PM
PT spacer could be incorrect. Try different sizes.
TKO Automag 68
02-26-2002, 06:37 PM
maybe but if it is a foamiless bolt it shouldn't have chop problems from the bolt. most likely your hopper can't keep up with your finger. are u using a 12v or a 9v. the only other thing is that u might be short stroking
Minimag4me
02-26-2002, 06:38 PM
do you have a parabolic powerfeed plug, if not call agd and get one for free, if so then adjust it correctly.
EnW
02-26-2002, 08:43 PM
What kind of nubbins are you using?
Try the plastic nubbins they work great.
I had a chopping problem with the wire ones...I guess I just couldn't get them adjusted right!
Anyway...the plastic ones need no adjustment and they work awesome for me.:D
Minimagyomama
02-27-2002, 09:16 AM
Where can i get a plastic one?
talls
02-27-2002, 11:03 AM
You can get plastic nubbins in the online store.
soilent green
02-27-2002, 12:12 PM
I tell everyone this when they ask about chopping is your feed plug all the way in
MagmanLee
02-27-2002, 04:05 PM
When i first got my gun i had bad paintcopping probs, it turned out my i was still using my cheap Brass Eagle paint, also a mag is harder on paint than normal guns.Always use good quality paint for ur mag. If u r chopping under rapid fire conditions, and ur equiment is fine(nubbin,good quailty paint,right bore barrel,etc.)it's probally short stroking. Go into ur backyard(or anyother place w/out ppl.)and practice shooting the gun by pulling the trigger all the way in, and letting it go all the way out before shooting again.After awhile u'll get used to it.