PDA

View Full Version : Emag trigger issue



Paintballnut777
02-08-2016, 12:36 AM
Is it common to have problems walking the trigger on an early Emag or does it just need tuning? More than likely it's probably me, isn't it.

Nobody
02-08-2016, 05:17 AM
The ability to walk a trigger is in 3 parts. 1) the software or the settings of the board 2) the physical tuinng in the gun, i.e. slight tricks that some have learned along the way & 3) actual user ability. The 3rd can be mitigated with adjusting the debounce setting & using ramping to help get the RoF up.

Cyco-Dude
02-08-2016, 06:37 AM
it's not the easiest trigger to walk, as it's a relatively long trigger pull with a bit of dead space before / after the activation point (which is needed for it to also work in mechanical mode). it should go pretty easy in hybrid mode though. you didn't mention what software you're using, but if it's in semi-auto, set the rof cap as high as it will go, otherwise you can end up pulling the trigger faster than the cap, and get an oscillating effect when firing.