rawbutter
03-01-2016, 11:14 PM
I'm selling the pneumatic Intelliframe off this gun for $150 shipped/PayPal'd.
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12799456_10153404432758321_251639247594823760_n.jp g?oh=562dd5b7b5c43bbf067ce136d5ddbcf4&oe=5761CF12
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12799253_10153404432803321_6137894039535923093_n.j pg?oh=5e46be6d247f11491e212024ff126cf8&oe=5762B2C5
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12472547_10153404432808321_4194178226092982736_n.j pg?oh=8bf2323d4b7dcbfcf06a5a065a7c77f6&oe=5797B133
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/12809612_10153404432748321_3789091314179427097_n.j pg?oh=afb79bb60b8794df62527790b221bf8d&oe=5765C391
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xfl1/v/t1.0-9/12512481_10153404432743321_7485860544362188126_n.j pg?oh=ca7fc03cab2b07b63170a87b67f7d3fe&oe=57601959
Believe it or not, I literally built this pneumatic Intelliframe just for fun, mostly so that someone without the tools and know-how could buy and enjoy it. Now I’d like to sell it for the cost I paid for the parts, then buy new parts and do it all over again.
How much do I want? $150 shipped, even though I spent $160:
- Intelliframe = $80
- pneumag kit = $50
- bullet LPR = $10
- various other fittings and tools = $20
I will need another frame to replace this one, so if you have a CF frame (with molded grips) or another Intelliframe, that could be a partial trade. You could also convince me to sell the whole gun (without the tank and barrel), but that will cost you $400+shipping. Because I won't WANT to sell the whole gun.
Instillation should be simple. No cutting or special tools required. Just take off your frame, remove the arm from your sear (this can be done with a flat-head screwdriver), and bolt on this frame. Then replace your valve fitting with the T fitting/LPR, and cut a little notch in your grips for the hose. You can make the LPR point forward or backward. It’s your choice. There’s enough spare hose in the frame to accommodate either style.
Oh, and this will work with any kind of valve. Obviously I recommend an x-valve with level 10, but it will shoot a classic valve too. Let me know what valve you're putting this on, though, because that will affect the recommended LPR output pressure.
Full disclosure: this pneumag frame isn’t quite walkable as is. But it is tap-able. The trigger is very light and fast. (I can tap-fire about 4-6 bps.) I played woodsball all day Saturday with this gun just to make sure it was working right, and it performed flawlessly.
And it COULD be made walkable. Right now this pneumatic frame has a double-trigger (which isn't very ergonomic for walking) and an RT valve (which requires about double the psi of a ULT, hence making the trigger heavier). But if you have a ULT and a blade trigger (with some trigger stops), this could be super-light and short. I know this because I have a second pneumag with that set-up, and I can walk that one consistently.
That's about it. Let me know if you have any questions.
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12799456_10153404432758321_251639247594823760_n.jp g?oh=562dd5b7b5c43bbf067ce136d5ddbcf4&oe=5761CF12
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12799253_10153404432803321_6137894039535923093_n.j pg?oh=5e46be6d247f11491e212024ff126cf8&oe=5762B2C5
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/12472547_10153404432808321_4194178226092982736_n.j pg?oh=8bf2323d4b7dcbfcf06a5a065a7c77f6&oe=5797B133
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/12809612_10153404432748321_3789091314179427097_n.j pg?oh=afb79bb60b8794df62527790b221bf8d&oe=5765C391
https://scontent-lga3-1.xx.fbcdn.net/hphotos-xfl1/v/t1.0-9/12512481_10153404432743321_7485860544362188126_n.j pg?oh=ca7fc03cab2b07b63170a87b67f7d3fe&oe=57601959
Believe it or not, I literally built this pneumatic Intelliframe just for fun, mostly so that someone without the tools and know-how could buy and enjoy it. Now I’d like to sell it for the cost I paid for the parts, then buy new parts and do it all over again.
How much do I want? $150 shipped, even though I spent $160:
- Intelliframe = $80
- pneumag kit = $50
- bullet LPR = $10
- various other fittings and tools = $20
I will need another frame to replace this one, so if you have a CF frame (with molded grips) or another Intelliframe, that could be a partial trade. You could also convince me to sell the whole gun (without the tank and barrel), but that will cost you $400+shipping. Because I won't WANT to sell the whole gun.
Instillation should be simple. No cutting or special tools required. Just take off your frame, remove the arm from your sear (this can be done with a flat-head screwdriver), and bolt on this frame. Then replace your valve fitting with the T fitting/LPR, and cut a little notch in your grips for the hose. You can make the LPR point forward or backward. It’s your choice. There’s enough spare hose in the frame to accommodate either style.
Oh, and this will work with any kind of valve. Obviously I recommend an x-valve with level 10, but it will shoot a classic valve too. Let me know what valve you're putting this on, though, because that will affect the recommended LPR output pressure.
Full disclosure: this pneumag frame isn’t quite walkable as is. But it is tap-able. The trigger is very light and fast. (I can tap-fire about 4-6 bps.) I played woodsball all day Saturday with this gun just to make sure it was working right, and it performed flawlessly.
And it COULD be made walkable. Right now this pneumatic frame has a double-trigger (which isn't very ergonomic for walking) and an RT valve (which requires about double the psi of a ULT, hence making the trigger heavier). But if you have a ULT and a blade trigger (with some trigger stops), this could be super-light and short. I know this because I have a second pneumag with that set-up, and I can walk that one consistently.
That's about it. Let me know if you have any questions.