View Full Version : Cp reg question
Abjay
04-13-2016, 07:05 PM
If i take all the internals out of my cp reg can i use it as a gas through grip?
Nobody
04-13-2016, 09:57 PM
You can do that with any reg. As long as it still holds air, it will work.
BiNumber3
04-13-2016, 10:38 PM
Most regs will have a small hole in them, over pressure exhaust port? If you pull all internals out, that hole might need to be plugged, either with an internal sleeve or a set screw.
captian pinky
04-14-2016, 09:11 AM
Most regs will have a small hole in them, over pressure exhaust port? If you pull all internals out, that hole might need to be plugged, either with an internal sleeve or a set screw.
if it is the 3 piece cp reg i think the top and bottom have the same threads and can be screwed together with out leaking.
paint magnet
04-14-2016, 01:47 PM
Yes, but why wouldn't you sell the reg and buy a used gasthru for ten bucks? CP makes good regs but that's an expensive foregrip.
Abjay
04-14-2016, 04:06 PM
I want to keep the cp reg to use on my other guns but the cp reg is much smaller than the gas thru grip that i have. The macro lines fit perfect with a cp reg on it. And it makes the gun feel much smaller.
Abjay
04-15-2016, 08:45 PM
Captian pinky was right the top and botom fit togethet with no leaks. It shortens it up even more. Works perfect!
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.