bowcycle
06-09-2016, 07:53 PM
I originally wanted to do a boxmag, but when Loguzzzz's brackets came out, I decided to switch over. Plus, I had these great, red Halo shells and I play German side at OK D-Day, so the timing seemed perfect.
There's a picture limit per post, so you'll just have to scroll to see the whole thing.
Let me know what you think.
I can talk later about the things I did wrong. One of those was trying to get too fancy with the raceway rerouting. I wanted the copper elbow to snug in there and contour to the path of the paintballs. This is unnecessary, complicated, and means I ended up chopping way more than I needed to. It only partially worked anyway. Also, I shouldn't have cut the bottom off the feed. If I had left it alone, it would have added more support in the end.
Here's what I did cut
92655
and here's what I ended up with
92656
92657
92658
92659
I wanted to use 45* elbows to make the upward transition smoother and I wanted the first elbow to line up with the path of the original raceway as closely as possible.
There's a picture limit per post, so you'll just have to scroll to see the whole thing.
Let me know what you think.
I can talk later about the things I did wrong. One of those was trying to get too fancy with the raceway rerouting. I wanted the copper elbow to snug in there and contour to the path of the paintballs. This is unnecessary, complicated, and means I ended up chopping way more than I needed to. It only partially worked anyway. Also, I shouldn't have cut the bottom off the feed. If I had left it alone, it would have added more support in the end.
Here's what I did cut
92655
and here's what I ended up with
92656
92657
92658
92659
I wanted to use 45* elbows to make the upward transition smoother and I wanted the first elbow to line up with the path of the original raceway as closely as possible.