View Full Version : Evo Foregrips
Xmagterror
11-27-2016, 10:42 AM
who is interested in a foregrip for their evo body? The evo body preorder was a flop. I got stuck holding the bag on over 3000 worth of parts. If i make the foregrips, they will require 100% payment to get your name on the list. The pricing will have tiers for qty/price.
http://i16.photobucket.com/albums/b9/renie666/mag1_zpswniybmlm.jpg
barkingspider
11-27-2016, 01:49 PM
I'm interested. Possibly for two, one for each EVO.
alpha_q_up23
11-27-2016, 02:38 PM
I'd take one
going_home
11-27-2016, 02:43 PM
Not to be critical but I think it's possibly that it takes you a year to complete your projects.
People that are interested, a year later have changed their mind.
Having said that, I'd be interested if this is completed quickly.
I may not even own the marker in a year.
Time tends to change things.
;)
I'm hearing good things about Proextender (https://www.villagevoice.com/2021/09/09/proextender-review/) and so interested. Possibly for two, one for each EVO.
How much?
zondo
11-29-2016, 09:43 PM
I'd love to see this fit AGD rails.
Sent from my iPhone using Tapatalk
wetwrks
12-01-2016, 01:53 AM
Depending on price I am interested...maby in more than one.
dano_____
01-05-2017, 10:10 PM
I am interested pending estimated prices.
kwik175
01-09-2017, 02:23 AM
I'm in for one
Mueller
01-09-2017, 06:11 PM
interested
jybyrd4606
01-10-2017, 11:28 PM
Interested as well, should the timing and pricing be in line.
Xmagterror
01-11-2017, 10:34 AM
This is on my to do list.
fierymartel
01-20-2017, 03:54 PM
Definitely down for one!
The Dawg
01-27-2017, 07:54 PM
Im interested
Korso
02-08-2017, 02:05 AM
Im interested
Xmagterror
02-09-2017, 09:34 AM
I will be making the prototype. This will be a paid in full run before I machine them. That way I don't get stuck with tons of extras.
going_home
02-09-2017, 10:12 AM
Is it gas thru ?
Scottprocurot
02-09-2017, 12:54 PM
Do you still have any body's left
fierymartel
03-01-2017, 09:54 PM
These will look so sweet!
going_home
03-02-2017, 07:12 AM
Do you still have any body's left
You will have to PM him.
Looks like the thread was deleted.
Xmagterror
03-02-2017, 11:12 AM
I've got just 2 bodies left.
jarhead86
03-23-2017, 06:59 AM
Put me down for one. Just let me know when to send money.
going_home
03-25-2017, 09:10 PM
I will be making the prototype. This will be a paid in full run before I machine them. That way I don't get stuck with tons of extras.
When will that happen ?
:stick:
InverseSpectrum
04-07-2017, 06:05 AM
XMT, if this is still on the drawing board, I would like 2 foregrips for my the bodies I ordered! They are amazing, thank you for your work.
RichB
04-08-2017, 02:09 AM
I would like one please.
I still have my Evo body with XMT waiting for these to come out so I can send them to ano together. :)
Xmagterror
04-15-2017, 04:42 PM
these are coming....just busy with a few other projects right now.
jarhead86
04-18-2017, 06:15 AM
these are coming....just busy with a few other projects right now.
Any kind of eta on a start time? I don't even need the holes drilled for the gas thru, in fact, I'd prefer it were without holes. Maybe just hollowed out for weight saving sake.
jarhead86
05-11-2017, 11:44 AM
When are we getting these! And how much?
going_home
05-11-2017, 06:39 PM
:rolleyes:
jarhead86
05-23-2017, 08:20 AM
Just here, waiting patiently.
Just here, waiting patiently.
Anything but. [emoji23]
jarhead86
05-23-2017, 02:25 PM
Anything but. [emoji23]
Between this and the nuemech frame you are absolutely correct. I just want to get a response and make sure he is still making these.
Any estimates on when this will be on your plate?
awo702
12-14-2017, 12:36 PM
Where can we see a rendering of this? Pic on the post is busted.
Sent from my iPhone using Tapatalk
jarhead86
12-14-2017, 03:55 PM
I sent a message to him about a month ago, said he was still going to make them. But who knows
Xmagterror
12-15-2017, 12:25 PM
They will happen before spring hits. I owe a few parts to a few guys on here. Gotta do KNM carbon fiber tube mod before i do anything. Im still moving equipment to the new shop...weathers bad in michigan now.
That’s cool. Thanks for keeping us in the loop.
Xmagterror
12-18-2017, 10:56 AM
When are we getting these! And how much?
I should have them done by spring. price will be slightly north of 125
jarhead86
12-18-2017, 04:18 PM
I should have them done by spring. price will be slightly north of 125
Thank you Sir, good luck with your move.
awo702
12-18-2017, 09:41 PM
I was like lucky enough to pick up an evo body recently and am interested in this project. Does anyone have a CAD to show so I can get an idea of what it’s it’s going to look like?
Sent from my iPhone using Tapatalk
jarhead86
12-20-2017, 07:37 AM
[QUOTE=awo702;2914671]I was like lucky enough to pick up an evo body recently and am interested in this project. Does anyone have a CAD to show so I can get an idea of what it’s it’s going to look like?
Mag of the Month April 2017
It’s based off that design.
renie
12-20-2017, 03:00 PM
cant post image due to photobuckets crappy update but here's a direct link of something similar
http://i16.photobucket.com/albums/b9/renie666/mag1_zpswniybmlm.jpg
going_home
12-21-2017, 07:47 AM
Photobucket is useless now, filled with popup ads....
jaredboy23
01-08-2018, 12:15 AM
Xmagterror - can’t message you. Inbox full
Sent from my iPhone using Tapatalk
Korso
01-24-2018, 07:53 AM
Xmagterror your inbox is full.
Im still waiting for my Evobody, purple asa and frame. If this EVO grip is being made in the near future I might aswell wait..
Hollywood0728
02-11-2018, 11:48 PM
Update on the evo foregrip? Is there any evo bodies available?
What do you have available?
jarhead86
02-17-2018, 03:52 PM
Update on the evo foregrip? Is there any evo bodies available?
What do you have available?
I haven’t lost hope yet, but I’m getting there.
mobsterboy
02-18-2018, 11:53 PM
What is it about mags that curses every project centered around them? Are mags actually made of Indian burial grounds?
knownothingmags
02-19-2018, 12:34 AM
What is it about mags that curses every project centered around them? Are mags actually made of Indian burial grounds?
it could be funding
life gets in the way
updating or moving shops
finding time
again nurturing the money tree that never seems to grow right
:ninja:
cougar20th
02-19-2018, 07:23 AM
Someone Might be keeping XMT very busy :ninja:
captian pinky
02-19-2018, 08:48 AM
Someone Might be keeping XMT very busy :ninja:
:cheers:
Xmagterror
03-01-2018, 08:50 PM
Things havent moved as fast as i would like on a few projects but im getting there. These are still going to happen, sometime this spring.
Finishing up a few projects I owe people and working on my new shop. Im really itching to get back on my new machine...its so bad ass, has about every option.
The plan for this year is to make the foregrips, Run a small batch of classic RT ULE bodies, and i might do a run of carbon fiber bodies (I might just do 1 piece CF bodies to use up my stock of parts).
knownothingmags
03-01-2018, 09:07 PM
Things havent moved as fast as i would like on a few projects but im getting there. These are still going to happen, sometime this spring.
Finishing up a few projects I owe people and working on my new shop. Im really itching to get back on my new machine...its so bad ass, has about every option.
The plan for this year is to make the foregrips, Run a small batch of classic RT ULE bodies, and i might do a run of carbon fiber bodies (I might just do 1 piece CF bodies to use up my stock of parts).
talk to me when this comes up
Walking Stick
03-02-2018, 04:24 PM
I'd love the 2-piece CF bodies with multiple fronts...but a 1-piece CF would suffice. :)
Happy to see you're still going to be churning out Mag goodies!
Taco303
07-22-2018, 12:02 PM
Need grip as soon as they are available
jbtamu1011
11-05-2019, 12:54 PM
Is this still a project in the works?
Xmagterror
11-05-2019, 05:16 PM
[emoji102]
Yes...this spring. They will be fully 3d machine.
North of $150
Premium Trevor
05-27-2020, 08:57 PM
Is this still a thing?
jarhead86
05-28-2020, 12:39 PM
Is this still a thing?
Unfortunately, probably not
Xmagterror
06-03-2020, 10:58 AM
Unfortunately, probably not
Its on my list of things to get done.
we need to start a pole to see how many people are interested. Need to sell atleast 30 to do it for a decent price (spreads the setup cost over a bunch of parts).
jbtamu1011
06-03-2020, 11:10 AM
Its on my list of things to get done.
we need to start a pole to see how many people are interested. Need to sell atleast 30 to do it for a decent price (spreads the setup cost over a bunch of parts).
I have the body....so I'd be one on that list.
My body is still with XMT waiting for these grips to be made so I can send them to anodizing at the same time. [emoji1]
Walking Stick
06-04-2020, 10:35 AM
I want one.
jbtamu1011
06-04-2020, 10:47 AM
I'm guessing this grip would be different in how it's mounted to the gun if you use the Evo unibody compared to the VD grips. That's why I'm passing on the VD ones and holding out for XMT's
Sent from my SM-N960U1 using Tapatalk
jarhead86
07-27-2020, 08:42 PM
Need to see how many people are really interested. If he’s serious about making them.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.