interest in another run of carbon fiber 2 piece XULE Bodies?

[Xmagterror]

I need a few of these for myself, thinking about making another batch. Im only going to make the 2 piece.
Is anyone interested?

http://i182.photobucket.com/albums/x291/bridgemach90/Pair_zps22eadbbb.jpg

[knownothingmags]

Damn id be up for a one piece 😀

Sent from my SM-G930V using Tapatalk

[audioSLAVE]

What was the price point again? All styles again?

[going_home]

Thought about making a classic RT version ?

[Xmagterror]

Thought about making a classic RT version ?

Im doing one for cougar20th. no plans on making any more.

[Xmagterror]

What was the price point again? All styles again?

aprox $250. They are very expensive to produce.

[Mondoatx]

Some silly questions here...

I assume they take cocker barrels?

When would they be ready?

I may be interested... but I would need some time to acquire funding for a $250 body.

[Nobody]

What body style would these be? ULE, RT (the length & front, not what it goes onto), Minimag?

[cougar20th]

Im doing one for cougar20th. no plans on making any more.

I think its very fitting that it is the first RT body (prototype) and then reworked to be the last.

[lifeincolorado]

To be honest when it was a hard decision to choose the evo over this when you were making both. I don't regret getting the evo, which is near completion, but I'd be interested in picking one of these up as well depending on when they are available.

[zulubravo44]

I'd be interested if the sear slot were made wide enough to make it pump-compatible.

[Chronobreak]

I think its very fitting that it is the first RT body (prototype) and then reworked to be the last.

I was wondering why you sold that thing..

XMT , if your feeling frisky enough to make another for Classic RT..pm me

I would be leary of doing anything without pre orders and or some form of pre payment, I still have a few left and anytime someone says they want one they dont have the $ or dont like the going rate.

[bbotts77]

I would be interested. Are the breaches only coming raw?

[jarhead86]

I'm just curious as to when you are going to make the Evo forgrip? Then I may be interested in one of these

[Chris TS-1438]

I would like to have one of these but I would like to have one sent to me in pieces so I could anodize the breach... is the assembly or disassembly difficult or even possible for the end user?

[UltraMag527]

I up for one, and was there an answer to Chris TS question.

[Patron God of Pirates]

I would like to have one of these but I would like to have one sent to me in pieces so I could anodize the breach... is the assembly or disassembly difficult or even possible for the end user?

The front and back slide right off. Unless you glue it on they are kind of always separate.

[PaintballSmurf13]

I'm down for one.

but, it REALLY need a classic RT body... aluminum or CF... I want to finish this ancient project of mine.

[Apathetic_Chaos]

If you open up to any Classic RT bodies, let me know, I'm on the hunt

Sent from my SAMSUNG-SM-G930A using Tapatalk

[psunitro]

id be interested, and interested in the minimag ones

[Xmagterror]

I plan to make a batch of classic RT bodies later this year. I haven't been on here much for the last 3 months. Working on something thats going to be BIG!!!

[Apathetic_Chaos]

Can't wait to see what you are working on!

Sent from my SAMSUNG-SM-G930A using Tapatalk

[audioSLAVE]

I plan to make a batch of classic RT bodies later this year. I haven't been on here much for the last 3 months. Working on something thats going to be BIG!!!

Nice! I need one.

[UltraMag527]

Bigger than Luke's LCE90 Frame

[splashkitsrock420]

Im interested in a classic rt body for sure ......take my $$

[Bunny]

I took my automag RT out at Tunaball this year and realized how bad elbows suck.... Please do another batch of classic rt bodies... :headbang:

[UltraMag527]

Bump

Any gossip on this matter?

[vintage]

I took my automag RT out at Tunaball this year and realized how bad elbows suck.... Please do another batch of classic rt bodies... :headbang:

sounds like you were using the wrong elbow.

[going_home]

sounds like you were using the wrong elbow.

I hate elbows, only use vert feeds.

Even tried the Python style aluminum one but it feels like its putting the hopper a foot above the marker.

http://www.doropaintball.com/ab1038101equick/shopexd.asp?id=14204

And then theres the Allen Paintball atomic elbow, but they will slip after a while.

http://www.allenpaintball.com/retailframeset.html

.......

[Hollywood0728]

What’s the status on this

[Ff33gfd]

Following

[zondo]

I took my automag RT out at Tunaball this year and realized how bad elbows suck.... Please do another batch of classic rt bodies... :headbang:

Wasn't Beemer there to preach about the blessings of the warpfeed?

[OneSelfLost]

Sooo .. what's coming down the pipeline?? :) :shooting:

[Taco303]

I'm interestex

[paint magnet]

...also interested. Please update.

Anyone watching with one to sell I have cash in hand, send me a PM.

[jester2844]

I would probably be interested

[jarhead86]

Interested

[st6212]

Hi,

Is this still happening?

I'd like to buy one.

Thanks.

[ClueLess]

PayPal Ready... I need a few.

[boddah]

Anyone have pics of full mag with this body?


Sent from my iPhone using Tapatalk

[st6212]

Anyone have pics of full mag with this body?


Sent from my iPhone using Tapatalk

http://www.pbnation.com/showthread.php?t=4816409
http://www.pbnation.com/showthread.php?t=5179721

[Walking Stick]

Damn, XMT could make some sales right now with his body styles due to the exponential increased interest (from people with money in their hands for once) in Automags and mechs in general!

[knownothingmags]

so the last i was told he is moving his shop. so the machines that do this work may be getting ready to get moved.
or....
total speculation, he is getting ready behind the scenes to pop up an say hey here is what i have for sale.

but he is moving things to a new shop. hope this helps with peoples concerns, and help with extending patience

[steve_81]

I'd be interested as well.

[AnthonyW]

I'd be interested got cool mag builds to finialize ;)

[splashkitsrock420]

I want an og rt body o pls pls

[Xmagterror]

This is still going to happen. its on my to do list.
Im still finishing up the shop. getting close to having that done soon.

[Ff33gfd]

Thanks for the update bro. Glad to know we all get to benefit from your new shop.

[Walking Stick]

This is still going to happen. its on my to do list.
Im still finishing up the shop. getting close to having that done soon.

Great to know you're still involved and can't wait to see what else you'll be putting out in the 'Mag market!

[ikillforwork]

As you know I'm interested.

Sent from my SM-G965U using Tapatalk

[Bunny]

This is still going to happen. its on my to do list.
Im still finishing up the shop. getting close to having that done soon.

Keep us posted!!

[mh53eplt]

I'll bite. I need a body for Luke's Z2.

[Xmagterror]

This is still going to happen. things are just moving a little slow right now. I owe a few guys a few parts, once i get done with that i will be making more carbon bodies.

[Walking Stick]

Your news keeps getting better and better XMT! Glad I held out so I don't overpay for the few that occassionally pop up! Planning any more ULE MM & RT-style body runs?

[Apathetic_Chaos]

I'm waiting patiently, really wanna do a carbon mag.

Sent from my SM-G960U using Tapatalk

[Salad Fingers]

Glad to hear this will happen when it does! Thanks for the update

[Gundam V]

I already have a couple of projects in the works and seeing this just makes me want to add another one. I need one these in my collection, looking forward to when they will be available.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Xmagterror]

everyone that intends to buy a body should post what they want. I think im only going to do the 2 piece bodies.

[steve_81]

I'll take one two piece Carbon Fiber body!

[Gundam V]

There were other options besides what's pictured? Or are you asking which version of mag? Forgive me for not knowing, but I've been away for so long and just recently started playing again. Because of this huge amount of time away I haven't been keeping up with what's been going on in the community.....freaking life....... [emoji39]

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Salad Fingers]

I am in for a two piece body when they’re made/available

[st6212]

There were other options besides what's pictured? Or are you asking which version of mag? Forgive me for not knowing, but I've been away for so long and just recently started playing again. Because of this huge amount of time away I haven't been keeping up with what's been going on in the community.....freaking life....... [emoji39]

Sent from my SAMSUNG-SM-G935A using Tapatalk

I think maybe XMT meant the type of front you want on the body? ULE, extended ULE, RT or Minimag fronts?

XMT, I'd like to buy one. 2 piece CF, regular ULE style for me.

Thanks.

[Gundam V]

If that's what he meant, damn...... that's a tough one....... I've always liked the rt and minimag style bodies...... automag and ule are nice too, but I like minimag and rt style of body better....... hmmm......I need a day or two to think about this.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Walking Stick]

As seen in the pic of XMT's original post on the fisrt page, at the bottom is the two-(carbon fiber)-piece design. I believe there were 4 front options - RT, Minimag, Automag and ULE/Emag/RT Pro.

A one-(carbon fiber)-piece is exactly that with a vertical feedneck attached to the top which is the design shown on top. Please see the following for further examples:
1st entry in -*-*-January-2018-MOTM-Contest-*-*-OPEN-Class-Poll (http://www.automags.org/forums/showthread.php?275157-*-*-January-2018-MOTM-Contest-*-*-OPEN-Class-Poll)
2nd entry in -*-*-October-2017-MOTM-Contest-*-*-OPEN-Class-Poll (http://www.automags.org/forums/showthread.php?274988-*-*-October-2017-MOTM-Contest-*-*-OPEN-Class-Poll)
(You'll notice the first submission also with a carbon fiber back half and ULE front which was not XMT but rather RPG or WarpedMephisto.)

[Gundam V]

Thanks for the clarification, now that I've mulled over it. I'm interested in the one with an rt front.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Alexachit]

I am in for a 2 piece RT Clasic body.

[steve_81]

One 2 piece AM/MM length here.

[Xmagterror]

99978

[Xmagterror]

bodies will be sanded carbon fiber (gloss shown) with choice of tip. ULE, RT or Minimag. The aluminum part will be anodized black. feedneck and detents not included

[steve_81]

I know it's still pretty early but any ETA for these?

[Walking Stick]

everyone that intends to buy a body should post what they want. I think im only going to do the 2 piece bodies.


bodies will be sanded carbon fiber (gloss shown) with choice of tip. ULE, RT or Minimag. The aluminum part will be anodized black. feedneck and detents not included

Yep, mark me for a 2-pc with all the fronts! Sanded definitely looks better to me - stands out more without all that gloss. Indifferent about the center ano because it'll get re-ano'd later anyhow. Then I'll just wait for another ULE Minimag run and save half my money compared to the going rate!

[alpha_q_up23]

bodies will be sanded carbon fiber (gloss shown) is there an option for a matte finish to the carbon fiber?

[audioSLAVE]

is there an option for a matte finish to the carbon fiber?

I believe the sanded ones are the matte finish.

[scootdogss]

I'm in for a ULE tip.

[audioSLAVE]

Any chance of a "Pariah" front?

[knownothingmags]

Any chance of a "Pariah" front?

:tard::D

[audioSLAVE]

:tard::D

Uh oh, it was edited, what’d I miss? Lol. I saw someone bid on yours so I assumed you were letting it play out on eBay.

[knownothingmags]

Uh oh, it was edited, what’d I miss? Lol. I saw someone bid on yours so I assumed you were letting it play out on eBay.I added the smiley.

Sent from my SM-G930V using Tapatalk

[audioSLAVE]

I added the smiley.

Sent from my SM-G930V using Tapatalk

It’s a valid question though, he did do a one-off Exile RT classic body.

[El Zilcho]

I assume no but figure I will check. My aluminum Minimag body has this annoying ping when fired, do these CF bodies have that same ping? I suspect with the Aluminum bodies it is just a by-product of all that light metal hanging off the front.

[knownothingmags]

It’s a valid question though, he did do a one-off Exile RT classic body.

totally agree.

[going_home]

It’s a valid question though, he did do a one-off Exile RT classic body.

I had an RT body I sent to Luke to cut the cheese grater off before I had it anodized dust black.

;)

[audioSLAVE]

I had an RT body I sent to Luke to cut the cheese grater off before I had it anodized dust black.

;)

Crush my dreams. Well, thanks for clarifying and it’s good to know the back story. It’s a cool piece none the less.

[knownothingmags]

I had an RT body I sent to Luke to cut the cheese grater off before I had it anodized dust black.

;)

oh yeah that's right.

[going_home]

Crush my dreams. Well, thanks for clarifying and it’s good to know the back story. It’s a cool piece none the less.

Whys that ?

As far as I know its the only one with no cheese grater.

I've always hated those things lol.

;)

[audioSLAVE]

Whys that ?

As far as I know its the only one with no cheese grater.

I've always hated those things lol.

;)

Crush my dreams as far as the possibility of a front other than the three offered considering Luke did it and not XMT.

[El Zilcho]

I am interested in an RT front and possibly a 2nd with a Minimag front

[going_home]

Crush my dreams as far as the possibility of a front other than the three offered considering Luke did it and not XMT.

Why dont you ask Luke if he will cut the front ?

Well, when you have it in hand...


;)

[JimBobFett]

I think I'd be in for a gloss one with all the fronts.

[notoriousMAG]

in for one that will fit an RT Classic if it becomes an option

[lifeincolorado]

I’d be interested in a 2 piece with minimag front and possibly a ULE front. How much are the extra fronts?

[Gundam V]

I been wondering since it's been a minute since xmt touched base. Do you have a time frame of how soon your gonna start doing the bodies run?

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Xmagterror]

I been wondering since it's been a minute since xmt touched base. Do you have a time frame of how soon your gonna start doing the bodies run?

Sent from my SAMSUNG-SM-G935A using Tapatalk

The plan is to make carbon fiber ULE bodies and also aluminum MM and RT front ULE bodies + i will be doing a batch of Classic RT Ule Bodies. Doing them this winter. Things have been moving slow the last year but the pace will pick up soon. Ive been busy finishing the new shop and adding 5 axis to the mazak.

[Walking Stick]

Good to hear everything is moving along for you and soon us! I'll be ordering both carbon fiber and aluminum Minimag bodies.

[Xyxyll]

Subscribing to the thread for future updates. Looking forward to the opportunity to pick up a Classic RT front version, in CF or aluminum, whatever's available.

[tucson.az.jbreen]

Very interested in the alluminum minimag bodies! Release them right after tax return season!

[captian pinky]

Ive been busy finishing the new shop and adding 5 axis to the mazak.

NICE!. That should be fun to mess around with.

[jasontthomas]

I’d be willing to take a carbon fiber ULE and aluminum mm body. I’d totally jump on that original RT body but I’ve got an RT with SN 180 and have had it since I was 13. I can’t justify changing up that sweetness.

[aruge]

In for an aluminum or CF mini mag

[Xmagterror]

Getting ready to start the preorder soon guys. getting prices on material right.
I owe a few people some parts and then its on like donkey kong running the machines so we have these by spring.

Jay

[Gundam V]

Oh hell's yeah, credit card is ready?!?! [emoji38]

Sent from my SAMSUNG-SM-G935A using Tapatalk

[ascinder]

I was in for an RT style body but I ended up getting a used XMT body from an earlier run. I am still interested in just the ULE front by itself though.

[Zone Drifter]

I don't even own a classic RT and I'd be down for buying a body that fits it.

Honestly, making these for the RT is a game changer for anyone who owns one and wants to get more out of the old marker.

[dwn0414]

Interested in a ule body

[magman313]

Deff want a minimag body.

[rkjunior303]

definitely interested in a minimag style body for the Classic RT if that's an option.

[Ferrari004]

I am interested in the mini style.

[notoriousMAG]

Still checking this regularly...Classic RT

[blackelk]

I'm in for a classic RT also.

[minimag1]

I'm in for one ULE body.

[mobsterboy]

definitely interested in a minimag style body for the Classic RT if that's an option.


Still checking this regularly...Classic RT


I'm in for a classic RT also.

Looks like just one? Unless XMT has changed that plan from earlier.



Thought about making a classic RT version ?

Im doing one for cougar20th. no plans on making any more.

[P8ntballr4life]

I am interested in the mini style.

^^^this post was from me. Just regained access to my old account, YESS!!

[ascinder]

Xmagterror, any updates on that preorder? Seems like some people are chomping at the bit over on the AGD FB group too...

[emo.83]

I would be interested in one of these XULE bodies

[P8ntballr4life]

For the minimag bodies, what material and anodizing if any have you decided on? Thanks

[Xmagterror]

Ill start the pre order very soon.

ule bodies are 7075 and will be unanodized.

[Apathetic_Chaos]

I might be in for a minimag style and a cf body

Sent from my SM-G960U using Tapatalk

[Xyxyll]

Really looking forward to this. My wallet perhaps less so.

Bring it on!

[Gundam V]

I ordered an armada body from Luke, now XMT is about to do a preorder. 2019 is gonna be a horrible year for my wallet.....

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Apathetic_Chaos]

I ordered an armada body from Luke, now XMT is about to do a preorder. 2019 is gonna be a horrible year for my wallet.....

Sent from my SAMSUNG-SM-G935A using TapatalkI'm in the same boat, but there will be beautiful mags

Sent from my SM-G960U using Tapatalk

[Walking Stick]

I ordered an armada body from Luke, now XMT is about to do a preorder. 2019 is gonna be a horrible year for my wallet.....

And if Tim brings out some new colored X valves...couldn't yinz give us a 6 month interval between these highly desired items!? It's all a blessing and a curse.

[Gundam V]

And if Tim brings out some new colored X valves...couldn't yinz give us a 6 month interval between these highly desired items!? It's all a blessing and a curse.I can only hope that if it does happen, it happens toward the end of the year.....I'm already stretching myself thin as it is... [emoji24]

Sent from my SAMSUNG-SM-G935A using Tapatalk

[temilotzin]

I'm interested. MM style with an anodized receiver.


Sent from my iPhone using Tapatalk

[JimBobFett]

I'm still interested, no matter the wait. If buying 2 helps to get things going, I can do that also. It's just money... lol.

[Xyxyll]

I'm actually appreciating the wait because of a slew of recent purchases, but I am in for at least one no matter whether he pulls the trigger today or months from now. :D

What's everyone's anodize plan for their aluminum bodies? Maybe we try to get a group-buy anodize session for one color?

[mobsterboy]

I had an XMT Minimag ULE body that I could have built but passed it on to a friend because it was already a beautiful shade of purple. Might do a nice Gloss Blue or Red and pair with an M86 Single Trigger I have.

[MiniMaggin]

Hey recently starting to play paintball again form years hiatus. i have an OG minimag. just ordered an x valve... and now im seeing these sick carbon fiber bodies... whats the status of these being made?... i'd be interested in a minimag front carbon fiber body.

[Xmagterror]

Pre order in dealers section will be up by next Sunday. I gotta find my pictures.
The plan is to make carbon fiber, RT and Minimag front ule, and classic RT bodies.

Minimum Quantity for each style must be met to make the runs happen.

[going_home]

What's the timeline from payment to delivery ?

[Gundam V]

I got my hands on a classic rt at the end of January, maybe I'll pick up a classic rt body as well.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[STONERSBLISS]

I am interested in an order. Funds available right now. I would like a carbon fiber rt ule body with very feed and cheesegrater holes on the front if possible. I really hope that we get the amount of interest you need to get a run going!

[Gundam V]

I am interested in an order. Funds available right now. I would like a carbon fiber rt ule body with very feed and cheesegrater holes on the front if possible. I really hope that we get the amount of interest you need to get a run going!Based on the feedback this has received so far, I don't think it'll be too much of a concern with numbers needed for a run.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[Xyxyll]

Based on the feedback this has received so far, I don't think it'll be too much of a concern with numbers needed for a run.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Yeah, my initial reaction when he listed each of the four body types was "well, I guess my wishlist just went from two to four bodies."

I'm standing by for pre-order pricing, but as long as it's not crazy, I'm expecting to pick up at least two.

@XMT, are you planning to stock the better-selling bodies or are we only doing these in batch pre-ordered runs? Machining any extra beyond the pre-order? I'm wondering what availability will be like on these after this run.

[magman313]

So it's only going to be the carbon fiber bodies or will there be aluminum minimag ule bodies too? That's what I would really like.

[Lanechaser]

Count me in for one

[cvan_550]

1 carbon fibre body please


Sent from my iPhone using Tapatalk

[yadoo]

So it's only going to be the carbon fiber bodies or will there be aluminum minimag ule bodies too? That's what I would really like.
Hoping for these also

[Walking Stick]

magman313 & yadoo, I think yinz are good 'cause if you break it down XMT is going to make:
- carbon fiber bodies (being 3 pieces the fronts can easily be changed)
- RT-front & MM-front ule bodies (ule being aluminum)
- Classic RT ule body (aluminum body for small diameter, banjo bolt RT valve)

[Xmagterror]

Pre-order up in the dealers section!!! Making more carbon XULE, Aluminum MM and RT and also Classic RT Aluminum bodies.
Post over there what you want, I will put your name on the list and then collect down payment when we have all the names.

[MiniMaggin]

Will u make me a carbon fiber minimag body???? Puuuleasssse??

[lifeincolorado]

Minimaggin. You should refer to the thread mentioned in the post above yours. He does sell mm carbon bodies. See his thread in the dealers forum and get on the list.

[sidewayzs2k]

Where are these being sold?

[Gundam V]

Dealer's Forum.

Sent from my SM-G970U using Tapatalk