Help!

[Pudgey51]

Gassed up the old x valve earlier today, right from the get go it ran away on me and when it finally did stop it leaked out the barrel like crazy. Has Level 10 and ULT. Oiled it with Autolube through the ASA and it did the same again. Any ideas?

[bowcycle]

My first questions:
Is this a new (to you) valve or one you've used before?
and
If used, was it in this same config or have you changed stuff on the valve/marker since you last used it?
also
If used, when was the last time you ran it?

[Pudgey51]

I’ve used it before and everything on it is the same. It’s going on about 6 months now maybe since I played with it but more like 4 since I gassed it up and cycled it a few times

[vintage]

just guessing but I would check the ULT first.

[BigEvil]

Check and make sure the sear pin is still there or not hanging out.. make sure the main spring is good.

[TheRealKaz]

I'm guessing the carrier O-ring needs to be changed (it's to big) along with maybe a new main spring.