Rona Build

[dstud2000]

Rona project:

Y frame, PF left SS body, Classic Valve
Luke’s Katana trigger
Luke’s H2 Teth rail
Luke’s angled VASA
Luke’s Sidekick drop
CP gas thru grip
Sconi Feedneck
Python insert kit and barrel adapter
AKA Javalin Barrel

I have to get one more fitting to finish the bottom run of macro line, the way it is now puts too much twist in the macro and it causes the fittings to leak.


https://uploads.tapatalk-cdn.com/20200517/b0f06f2d3f8f3128217183bc71aaba81.jpg
https://uploads.tapatalk-cdn.com/20200517/fee2e668cd633743c36a1596bebd9f58.jpg
https://uploads.tapatalk-cdn.com/20200517/98d85616dce7aa89601c57e956c1162e.jpg


Sent from my iPhone using Tapatalk

[Walking Stick]

Y's always look and feel so good - glad to still see some around.

Add another fitting!? Just cut 2 feet of macro and run it from the ASA under the foregrip, up past the barrel, alongside the Revy, over the powerfeed, and down into the valve. Duh!

[Nobody]

You could try a 45° fitting and a straight macro or, depending on the kind of macro line you have, you could heat up the line to conform it to fit better, or try a hardline.

[dstud2000]

You could try a 45° fitting and a straight macro or, depending on the kind of macro line you have, you could heat up the line to conform it to fit better, or try a hardline.

I got it, I put in a 90 elbow on the fore grip and then a 90 swivel macro fitting to that and it lined up pretty good.


Sent from my iPhone using Tapatalk