Stella AM Barrel Tips & Sidekick Gas Through ASAs

[luke]

Lc Stella Barrel Tip.
Works on all Inception Designs Stella Backs

101911

[alpha_q_up23]

Ep?

[luke]

No sir, no boards available for EP's

[alpha_q_up23]

Ahhh pooo I seen that extra hole in the triggerframe panel and thought it was for a button, also nice tip you got there

[luke]

That hole is a view window just so you can see the T-Rex ram working. I only did that on the prototype MV Frame.

[the123]

I'm curious about the grip frame covers. Are the aluminum grips the only ones that fit the frame or is there an aftermarket source? How 'grippy' are they after they get moist/dirty?

[luke]

I'm curious about the grip frame covers. Are the aluminum grips the only ones that fit the frame or is there an aftermarket source? How 'grippy' are they after they get moist/dirty?

All of my grip frames use proprietary aluminum grips that I manufacturer.

[luke]

Sidekick-ASA

101913


101912

[Zone Drifter]

101913


101912

Oh my. . .

[ElGringo]

Digging the Stella tip and the sidekick asa

[Gundam V]

101913


101912Hey Luke, is that an asa for the sidekick that your gonna be selling soon?

Sent from my SM-G970U using Tapatalk

[luke]

This is a completely new design, redesigned Sidekick and ASA sold as a assembly. Available now.

[lobo_fuerte]

Nice barrel tip, interestingly odd drop on off asa can you please make a video of it on a marker getting aired up.

[luke]

Nice barrel tip, interestingly odd drop on off asa can you please make a video of it on a marker getting aired up.

This is no different than a Sidekick with a CP asa, really nothing to see. Plus I can no longer host video on my website.

[luke]

One thing I forgot to mention is that the New Sidekick ASA is the exact configuration as the original design. It may not feel exactly the same when you shoulder the your marker because of the ASA you were using. If you use a standard 68 ci tank with the new SK it will match the intended fit and feel. The first design was based on using a Geddon regulator to locate the tank position and find the two angles for the correct marker position when shouldered. I doubt any of the ASA's that were used on the original SK really gave you the fit I intended, the new design will get you there.

101916

101917

[jarhead86]

That stuff is looking sharp. Can’t wait to see a new body come from you.

[luke]

Hold my beer :)

101918

[Nobody]

The stella is a 2 piece barrel, not a 3 piece. Some the fronts have the threaded section for a tip, but in my opinion, the threaded tips had not been as popular. I do not know if they are being discontinued, but the greater majority of barrel tips are not tip threaded. A different front section could be nice, but how profitable would a dozen be for you?

[luke]

Yes, according to what Simon told me, "We have both options. We do a front that you can thread a muzzle break onto and we do fronts that are just smooth (Slimline) and we do carbon fronts that thread onto the backs via an aluminum part"

[jarhead86]

Hold my beer :)

101918

Holding. As long as the new Nummech frames are still not finished. After that it will be difficult

[luke]

Two new Lc grip frame designs going to production in about a week. :D

[jbtamu1011]

Two new Lc grip frame designs going to production in about a week. :D

This^ Can't wait to see what these are!!

[going_home]

Two new Lc grip frame designs going to production in about a week. :D

This guy never stops.....

;)

[luke]

This guy never stops.....;)

You should see what in line behind those. :D

[jarhead86]

You should see what in line behind those. :D

YES! Show Us!

[jbtamu1011]

Show us!!

Sent from my SM-N960U1 using Tapatalk

[luke]

lol, patience gentlemen...

[luke]

Two new Lc grip frame designs going to production in about a week...

both double and single trigger.

[alpha_q_up23]

single trigger

Tell me where to PayPal ;)

[Gundam V]

Luke, I have to ask......for your next body design will it be a stand alone body or will it be a unibody design and not need a rail? Can you at least tell me that much? Looking forward to the next version of your trigger frame.

Sent from my SM-G970U using Tapatalk

[jbtamu1011]

Must save money for new Luke build. Must save money for new Luke build. Must save money for new Luke build.

Sent from my SM-N960U1 using Tapatalk

[luke]

I have to ask......for your next body design will it be a stand alone body or will it be a Unibody design and not need a rail?

Body/Rail combo

[Gundam V]

Must save money for new Luke build. Must save money for new Luke build. Must save money for new Luke build.

Sent from my SM-N960U1 using TapatalkThats why I'm asking that question. I'm probably gonna buy his new body, rail, trigger frame, sidekick/asa combo.

Sent from my SM-G970U using Tapatalk

[luke]

Thats why I'm asking that question. I'm probably gonna buy his new body, rail, trigger frame, sidekick/asa combo.

Are you sure that's all you want? :D

[jbtamu1011]

Thats why I'm asking that question. I'm probably gonna buy his new body, rail, trigger frame, sidekick/asa combo.

Sent from my SM-G970U using TapatalkYessir. Exactly

Sent from my SM-N960U1 using Tapatalk

[alpha_q_up23]

Body/Rail combo

Again when and where do I paypal?

[Gundam V]

Are you sure that's all you want? :DWe'll see what else you release.
[emoji48][emoji48][emoji48][emoji48]

Sent from my SM-G970U using Tapatalk

[audioSLAVE]

Any new sight rails in the works?

[luke]

Any new sight rails in the works?

No sir, nothing like that in the works

[audioSLAVE]

No sir, nothing like that in the works

Alright, keep me posted.

[luke]

Single trigger: Tell me where to PayPal ;)


Body/Rail combo: Again when and where do I paypal?

Coming soon, no pre-orders necessary, when they go up for sale there will be plenty to go around. :cheers:

[Gundam V]

Coming soon, no pre-orders necessary, when they go up for sale there will be plenty to go around. :cheers:[emoji15][emoji15][emoji15][emoji15][emoji15][emoji15]
Well *****, depending on the situation I may need 2 body/rail combos......I was hoping to play paintball soon. But if parts are on the horizon soon, than my money will be going to build new mags instead. My armada build needs some Lc siblings anyway.
[emoji16][emoji16][emoji16][emoji16]

Sent from my SM-G970U using Tapatalk

[jbtamu1011]

I'd like a full build as well since i missed out on the Armada and Deflator.

Sent from my SM-N960U1 using Tapatalk

[Gundam V]

I'd like a full build as well since i missed out on the Armada and Deflator.

Sent from my SM-N960U1 using TapatalkI got in on later run of armada myself, but I missed out on deflator. I can tell you right now, pictures don't do those body/rail combo justice.

Sent from my SM-G970U using Tapatalk

[luke]

I do have one big surprise that I'm keeping under wraps until I prototype and test, just have to make sure I can get it right before I let the cat out of the bag. :D

[luke]

Forgot to mention, we are ICPL compliant with the single trigger frame, hopefully it will see some field time.

[Gundam V]

I do have one big surprise that I'm keeping under wraps until I prototype and test, just have to make sure I can get it right before I let the cat out of the bag. :DSuch a tease.
[emoji23][emoji23][emoji23][emoji23]

Sent from my SM-G970U using Tapatalk

[jarhead86]

Body/Rail combo

Like the Deflator Rail/body? Or more like the standard rails?

[luke]

No, the Deflator is not really a standard body/rail combination or even a Unibody. It's kind of a Uni-body with a hidden rail that's not really a rail, I guess it's an undefined class. LOL
This next one is a standard body and RTP rail design.

[dahoeb]

pinching my pennies, can't wait to see what you come up with!

[Gundam V]

No, the Deflator is not really a standard body/rail combination or even a Unibody. It's kind of a Uni-body with a hidden rail that's not really a rail, I guess it's an undefined class. LOL
This next one is a standard body and RTP rail design.Deflator is a body with a spacer, at least, that's what it looks like in the pictures.
[emoji16][emoji16][emoji16][emoji16]

Sent from my SM-G970U using Tapatalk

[luke]

Deflator is a body with a spacer, at least, that's what it looks like in the pictures.

No, not really a spacer either, it's a carrier that sits in a recess, flush to the bottom of the body. It holds the sear and detent and is all but completely hidden when assembled. ;)

[Zone Drifter]

I'm anxious to get my hands on that sidekick asa. I assume any future rail/body releases will be comparable in price to the most recent ones? I'll certainly need a body, especially since ULE bodies are still somewhat elusive.

[luke]

It's way to soon for me to think about pricing, not even sure what new custom bodies sell for today. That said I won't know until production is done, that's where the final cost numbers come from. It's just not something I have to look at in detail beforehand since everything is done in house. ;)

[mpsd]

How about a Mag-fed body/rail or unibody?

[Zone Drifter]

How about a Mag-fed body/rail or unibody?

Honestly if someone produces a mag-fed automag unibody, that would be #1 buy priority. Can basically name your price.

[luke]

I'm heavily invested in the next 10 parts slated for production, I cant even begin to think past that. I'm sure I can engineer a mag feed Automag, it just boils down to time, which I dont have for the foreseeable future. Those 10 parts dont include other unrelated personal projects sitting part done collecting dust. lol.

[Zone Drifter]

I'm heavily invested in the next 10 parts slated for production, I cant even begin to think past that. I'm sure I can engineer a mag feed Automag, it just boils down to time, which I dont have for the foreseeable future. Those 10 parts dont include other unrelated personal projects sitting part done collecting dust. lol.

So you're saying if we all buy enough of these new parts you're producing that you'll definitely, absolutely and certainly make a mag-fed mag body? ;)

[jbtamu1011]

I'm heavily invested in the next 10 parts slated for production, I cant even begin to think past that. I'm sure I can engineer a mag feed Automag, it just boils down to time, which I dont have for the foreseeable future. Those 10 parts dont include other unrelated personal projects sitting part done collecting dust. lol.
So, if you're keeping score, that's....
- single trigger frame
- double trigger frame
- rail
- body
- ?
- ?
- ?
- ?
- ?
- ?

Sent from my SM-N960U1 using Tapatalk

[luke]

So, if you're keeping score, that's....
- Sidekick ASA
- single trigger frame
- double trigger frame
- rail
- body
- Stella barrel tip
- ?
- ?
- ?
- ?



Why are you counting parts already sitting on the shelf? lol

[ElGringo]

Why are you counting parts already sitting on the shelf? lol
Yeah dude! I already got mine! Top notch work as usual

[luke]

Thank you sir. :cheers:

[jbtamu1011]

Why are you counting parts already sitting on the shelf? lolOh haha I was thinking 10 parts total! I'll put more question marks then [emoji12]

Sent from my SM-N960U1 using Tapatalk

[jbtamu1011]

:dIt's edited.

Sent from my SM-N960U1 using Tapatalk

[luke]

LOL, it's all good. Just keeping you on your toes. :)

[mpsd]

Thanks for replying. Still looking forward to what you come up with over the next few months. And hoping for a mag-fed body to join that list, eventually. :cheers:

[luke]

How about a Mag-fed body/rail or unibody?

I think it would be necessary to do a grip frame too due to space issues with the magazine.

How many different magazines are available, how many balls do they hold?

[Gundam V]

I think it would be necessary to do a grip frame too due to space issues with the magazine.

How many different magazines are available, how many balls do they hold?So, what your saying is if you were to take this up, it would be less that your making a magfed body and more like making a mag fed kit for an automag valve.

Sent from my SM-G970U using Tapatalk

[luke]

So, what your saying is if you were to take this up, it would be less that your making a magfed body and more like making a mag fed kit for an automag valve.

Yes sir, that's correct.

[jbtamu1011]

Oooo, need an update....It's been over a week! :cheers:

[Gundam V]

Oooo, need an update....It's been over a week! :cheers:Down boy, down!!!!! Relax, we on a need to know basis. If he hasn't said anything yet, than there ain't nothing worth mentioning yet. You should follow up after 2 weeks, so comeback next week.
[emoji16][emoji16][emoji16][emoji16]

Sent from my SM-G970U using Tapatalk

[jbtamu1011]

Down boy, down!!!!! Relax, we on a need to know basis. If he hasn't said anything yet, than there ain't nothing worth mentioning yet. You should follow up after 2 weeks, so comeback next week.
[emoji16][emoji16][emoji16][emoji16]

Sent from my SM-G970U using Tapatalk

But....but..... lol

[luke]

I have black Stella barrel tips and Sidekick ASA'a now in stock, I'll get them listed tonight or tomorrow.. :cheers:

[luke]

102003

[luke]

102004

[audioSLAVE]

Were these the two new products?

[luke]

Yes sir

[audioSLAVE]

Yes sir

Gotcha, I guess I read too far into all posts about new frames and bodies. How are those coming along? Any teasers?

[luke]

My mill broke down the day I was going to cut the prototype frames, took several weeks to figure out the problem, then more time to order parts, and several days to complete the repair, then family stuff came up in the middle of all that, then I got caught up in several personal projects that I needed to do because of the communist shut down over the c-19 scam. I think I'm about 7-10 days out of starting the frames again. Right now the personal projects are taking precedence over all else, but that was forced on me by our communist town mayor that went against council vote and shut our little town down. We don't nor did we ever have a virus problem, but here we are, anyway. :mad:

[mobsterboy]

My mill broke down the day I was going to cut the prototype frames, took several weeks to figure out the problem, then more time to order parts, and several days to complete the repair, then family stuff came up in the middle of all that, then I got caught up in several personal projects that I needed to do because of the communist shut down over the c-19 scam. I think I'm about 7-10 days out of starting the frames again. Right now the personal projects are taking precedence over all else, but that was forced on me by our communist town mayor that went against council vote and shut our little town down. We don't nor did we ever have a virus problem, but here we are, anyway. :mad:

On the Haas? What ended up breaking?

[luke]

The Humphrey QEV on the tool changer.

[luke]

102007

102008

102009