PDA

View Full Version : Isn't She Pretty??? *emag*


LaW
03-13-2002, 02:15 PM
http://www.uwm.edu/~jbrunner/new1.jpg
http://www.uwm.edu/~jbrunner/new2.jpg
http://www.uwm.edu/~jbrunner/new3.jpg



Ken (kpcustoms) DID a SPECTACULAR job on this awesome Powdercoating :)
jah871
03-13-2002, 02:18 PM
very nice looking marker. all you need is to dye your revvy red. i also like the adg sticker on your moniter.
LaW
03-13-2002, 02:20 PM
there's an agd sticker on all 4 of my monitors :) hehe and my revvy I like clear :) i'm just getting a black warp hose
shartley
03-13-2002, 02:26 PM
Nice setup. Good looking Marker.
cphilip
03-13-2002, 02:26 PM
She's a doll Law!


DRILL THAT HOPPER! :D
LaW
03-13-2002, 02:28 PM
I will drill it :) I'm going to get the longer black hose first... this hose was cut so short from when i bought it that it doesn't even go in all the way on both ends :) it's so short... wait i said that already... hehe I'm going to pick up a red revvy with xboard ... i like clear and i wouldn't mind a red one either :) hehe
MrAirgunRT
03-13-2002, 02:30 PM
Verryy Niccceee E-mag
Gecko
03-13-2002, 03:22 PM
there is just somthing so sexy about emags...
Gecko
Hemlock86
03-13-2002, 03:32 PM
get a clear warp hose :D
MiCRoFooL
03-13-2002, 03:38 PM
Come on fellas... his is a pile of doo compared to my little darlin' :D

http://www.uwm.edu/~hagen/E3.jpg
SlipknotX556
03-13-2002, 05:52 PM
no no they both are not better then my girl. and here she is.
Hysperion
03-13-2002, 07:34 PM
law get a polished body, it looks like crap with the black....sorry.
Cozmo51
03-13-2002, 09:26 PM
good call on that one hysperion, the chrome body is the way to go, it looks much better then the plain black.
LaW
03-13-2002, 10:51 PM
haha no way I'd ever go chrome body, that's crazy :)
RT 01037
03-14-2002, 12:18 AM
man o man law thats a sweet setup :) :D :)
boggerman
03-14-2002, 02:20 AM
:cool: Very nice looking emag, I like the black body with the red accents. Just a suggestion if you do drill your revy, I used a Unibit to do mine instead of a hole saw, the Unibit left a nice clean hole and was very easy to keep lined up.
LaW
03-14-2002, 06:58 AM
I'll be using my precious dremel :) hehe i'm not going to have a problem... thanks everyone for the kind comments
cphilip
03-14-2002, 09:08 AM
Use a one inch hole saw. Trust me on this!
LaW
03-14-2002, 10:34 AM
thanks for the tip :)
cphilip
03-14-2002, 10:54 AM
You should see the one I did first with my boring bit. In fact I will give it to you! Held it together with clear tape untill the replacement came. Cracked the snot out of it just as it was passing through. The stuff is a bit brittle but the small teeth evenly applied by the hole saw just eases right through it. Perfect hole.

One inch Hole saw complete with mandrel at Home Depot was $5. Revy half was $5 plus like $5 shipping!


Also cut yourself some short pieces of tubing and using the fittings and this short pieces to mock it all up just like you want it. Along with the fittings in place use these small pieces to locate and mark the location and angle you want to drill the holes. make sure you have the warp and revy mounted exactly where you want them to be while you are doing this mock up. Measure and mock fit a bunch before you drill... as always.

Good thing is you only end up drilling through the right half only. Both the bottom and top holes. So if you screw up only one half has to be replaced.

I learned all this the hard way.
LaW
03-14-2002, 11:02 AM
putting holes in plastic 101 :) thanks hehe
speedballbanks
03-15-2002, 02:33 PM
do you have any pics of the right side if the guni want to see the other side and oh yeah how much will it cost to get my rail,gadget,and intelliframe and how much did your cost to get done i was going to get that color done too.!!!!!!!!
LaW
03-15-2002, 02:36 PM
you'd have to talk with ken on the price. Everything is different. He has prices listed on his website www.kpcustoms.net


umm yeah i have pics hang on....
LaW
03-15-2002, 02:40 PM
http://www.uwm.edu/~jbrunner/front.jpg
http://www.uwm.edu/~jbrunner/right.jpg
Sir William
03-15-2002, 11:01 PM
LaW,
When I look at your masterpiece, I see an EMAG with the
WARPFEED tube going into a R hopper pwr feed from the
bottom. Is this a correct assumption? I,m trying to
figure out what to order for a set up like yours. Thanks
for a reply!!!:confused:
Snooky
03-16-2002, 03:41 AM
Does everyone on UW have an emag?
MiCRoFooL
03-16-2002, 11:38 AM
Hehehe... seems like it don't it? That was not by design either. I came on the team late and next thing I know, I'm hangin around a bunch of guys with EMags and RT's... and all of 'em are AO members. What a pleasant surprise that was. It just seems that Wisconsin loves mags!