shootdown after about 3bps, please help!!!

[mwlildude2222]

Hey, i am getting shootdown real bad after about 3bps. I really need help this is how the line is connected to the valve if it helps.


nitrogen going directly to the valve through a stainless line (crossfire 68, 3000)


Instant message me at mwlildude22! thanks.:confused:

[cphilip]

Something missing. On this Crossfire, its a screw in tank right? Could be important what is on that screw in. An on/off screwed in to far can cut flow. Bad pin in the ASA or the Crossfire causing pin not to depress all the way. Just thowing out some stuff. Bad reg on the tank even.

And then we get into the marker such as the regulator seat and scuh but the first step is the missing link in how its attached to the valve from the tank.

[mwlildude2222]

Yes, this tank is a screw in, fiber-wrapped tank, and it goes from a duckbill to a hose, which goes to a quick disconnect, which goes to the valve. I know its not the tank, because i've used it on other guns, and i've also used someone else's tank on my gun, and it did the same thing, so its not the tank, it has to be something in the gun i'm thinking, thanks for helping, and please ocntinue, i still don' tknow whats wrong.!!!

[Butterfingers]

how old is your mag?

[mwlildude2222]

I don' tknow how old it is, because i bought it used. I know the serial number though if that helps It is: CF20437
I hope that helps, thanks

[personman]

maby your preset tank is too low? try preset 800psi

[BlackVCG]

Check your on/off top. If it can go in two different ways reverse it from the direction it's in the valve right now.

[SoupRman]

also, maybe you have any aftermarket parts in the valve?

[Butterfingers]

Yeah thats pretty old. Im not sure when they started using symetrical on/off tops, but do what BlackVCG said and flip that little brass peice in your on/off assembly

[mwlildude2222]

I fixed it!!!!!!, thanks everyone. I have been working on this problem for a long time. Someone sold the gun to me for really cheap, and he said it was broken
and i got it to work thanks to you!!! thanks everyone, your awesome!!!

[BlackVCG]

Was it the on/off top that you needed to reverse? If not, what was the fix?

[mwlildude2222]

Yeah, that was it. The guy who sold it to me would be pretty pissed if he knew it was that little of a problem. That sucks for him, anyways, yeah, that was the problem, thanks for everything !!!