What's your dream gun?

[Miscue]

Dear Santa:

Can I trade my pony for a faded E-Mag, WarpFeed, and 88/4500 Flatline? If I chip in $50, can I get a HALO loader too?

Hehe. http://www.automags.org/ubb/smile.gif

What do you guys want?



------------------
'Sacrifice the Body'
68 PF - HyperFrame - 68 Flatline - SS BigShot

Miscue's Profile (http://www.liquidmagma.com/automags/miscue.php)

[magc68]

z grip emag. built in warpfeed. no tank. on gun compressor, no gavity fed laoders. i want the loader built into the gun as well. everything is force fed. and of course my freak barrel.

------------------
RT PRO (http://albums.photopoint.com/j/View?u=1648431&a=12618313&p=49167280)
RT PRO2 (http://albums.photopoint.com/j/View?u=1648431&a=12618313&p=49167279)

Team Website (http://recursionpb.homestead.com/index.html)

[Speed_Mag_22]

Blue/Black Faded z-gripped, E-mag, warpfeed to match, 68/4500 flatline with off set cradle annodized to match scheme, the final production of the HALO loader no proto's, and the best paintballin skills ever.

[zekewh]

Adrenaline Angel with Mt. Dew anodize, A.I.R., Every bore size boomer to go with it, with warp feed. That is me.

[X-Plosive]

Cobra Angel with a kind of ripper milling(I wish), annodized in blue crystal, warpfeed, ricochet 2k hopper, Warpfeed that runs on two 9v's in a parallel circuit, Angel Air or Max FLo, and Every bore size Boomstick to go with it.

[Ninja B0Y]

An Adrenaline Ironmen series Angel or a GZ series Angel.

[daveymag]

that would probably have to be a ripper cocker with all of the sweet internals, and a nice fade ano and freak kit.

[This message has been edited by daveymag (edited 06-16-2001).]

[kickass68mag]

Lets see here:
EMAG WITH BLUE FADE,
WARP FEED, BLUE WITH RICHOCET HOPPER,
CP BLUE FLAME DROP
114CU, 4500PSI ANGEL AIR
FREAK WITH EVERY SIZE TIP IN BLUE
Z GRIP
A NICE T STOCK
AND A CASE OF PROBALL PLATINUM

DAMN I DREAM TO MUCH, EITHER I GET A JOB, OR LIVE WITH OUT..........LIVE WITH OUT, MY 68 IS FINE

------------------
automag'um n' bodybag'um

[This message has been edited by kickass68mag (edited 06-16-2001).]

[Webmaster]

A Barrett .50 cal...

er... One of the new ULE Emags Tom has cooking in Royal Purple, matching warp, 68/4500 Flatline, halo, and my custom designed "Magnum" ported BOA barrel.

------------------
Webmaster - AutoMags.Org
webmaster@automags.org
----------------------
"Good...bad...I'm the guy with the gun." - Ash, Army of Darkness

[68 Mag]

Mine, when I get done with it.

[toadman7b22]

id have to say:
F5 cocker with
freak barrel
boomsticks in all diff sizes
halo
warpfeed
angel AIR
some sweet milling and anodizing
back up gun:
E-Mag with
freak
CP barrel Kit
Boomsticks in all diff sizes
halo
warpfeed
45/4500 tank
back up gun for the back up gun:
shocker s/f turbo
warpfeed
max flo 88/4500 tank
verticle reg
double trigger
RT (i saw this somewere for the shocker!!!)
angel frame on it
verticle feed
halo
houge SP? grips

equipment:
1 case of hellfire shipped to my house daily
1 case of marbalizer shipped daily
1 case of DH shipped daily
1 nice speedball feild
1 nice woods feild
a co2 fill station
a n2 fill station
10 freinds with guns to come over everyday to play


(i just woke up from dreaming)

[pyro45]

What ever of this will work together, I haven't dont the machanics yet..


E-mag = $1000
Iodized P/F body = $150
Freak Barrel = $200
Angel air = $600
P @ P air America Messiah reg (blue) = 120
Ricochet 12v hopper = $100
Warp feed (blue) = $150
Cp flame cradle with on/off= $65
ADCO E-dot sight = $90
Blue splash Kit = $100
Steel Venturi bolt with foamy = $50
Total Iodizing of the whole gun + some custom milling = $300

Total + $2925 + Tax


Grand total = $3200.... + shipping

New Grand Total = $3500

[Mega Man]

A Automag RT Pro. Body lightened, custom trigger, warp feed, all blck. Kinda like what a Dark Mag might look like.

------------------
If you were to take my legs and my right arm you would still lose to me...because I would still have my shooting arm

[gimp]

I'm pretty happy with my emag. I'd like it anodized a solid dark green though. 68/4500 flatline, and a green warp, with a green revolution. Havn't tried the halos yet. I already have most of it, except the anodizing and the 4500 flatline, but nobody has those yet. And my warp feed caught on fire, so I need to get that fixed.

[FeelTheRT]

from first to last..

1.) SFL Autococker
2.) Force 5 Autococker
3.) Emag w/ Warpfeed
4.) Angel LCD.

[Eagle]

Tippmann Hellhound

------------------
Die Screaming

[gmag]

68 powerfeed mag with a retro valve all chromed out.............and customized by dan @ triggernomics. 14 inch boomstick, 12 rev, and a 68 ci 3000 adjustable output ACI bulldog nitro tank.

[-§on-]

<font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by Eagle:
Tippmann Hellhound

</font>

Lmao..You problay couldn't afford to hold the trigger for 1 whole mintue. Thats like 800 rounds.

My Dream Gun is a Glock 18 with Extended Double clip, and Full auto.

My Dram Gun(s)

1. E-Mag Blue Splashed With Blue Warp
Kapp DropZone 2
114Ci Angel Air
Freak Kit Chrome With Blue Tip
Blue 12 volt
2. Evolution AutoCocker In Blue
3. Ans Cocker EVERYTHING BLUE

[Eagle]

Accually, that would be 3000rpm, thats 50rps, go Terminator 2 on ya http://www.automags.org/ubb/smile.gif

------------------
Die Screaming

[Jonneh]

<font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by Eagle:
Tippmann Hellhound

</font>
DAMN YOU! I wanted it

but I'll settle for a pgp

[gt90]

electro talon http://www.automags.org/ubb/wink.gif

yeah!

[morpheus]

my old mag back http://www.automags.org/ubb/biggrin.gif

[ReTroMagBoy]

Lime Green Adrenalin LCD
5 Match Anod 10in Titanium boomsticks
Dye Site Rail w/intellifeed matched
45ci 4500psi Conquest w/black short shocktech drop forward

Gold ULE http://www.automags.org/ubb/smile.gif Black Teflon Warp Body E-Mag
Matching Warp Feed and rev
5 Match Anod 12in Titanium Boomsticks
Milled And Round Battery
68ci 4500psi Flatline w/CP rail adapter and long black shocktech drop

ahh!

[Jester]

My dream gun is as follows:
Micro Emag in chrome with a clear warp feed, clear halo loader, 8, 10inch titanium boomsticks, chrome Kapp dropzone with a 45/4500 conquest nitro system. That would be nice.

------------------
The thing about a rat race is, if you win, you're still a rat.

[Lord Vader]

...a paintball railgun...or arm-mounted Hellhound cannons :-).

------------------
&lt;&lt;&lt;Dark Jedi Mag&gt;&gt;&gt;
Black Teflon E-mag body
Retro Valve
Black 9V Revvy
LAPCO 12" Autospirit
KAPP black foregrip
PMI rubber grips
Sretch-Z Drop Forward
(coming soon) 68/3000 Flatline

"I am your father."
--Darth Vader

[gimp]

<font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by gt90:
electro talon http://www.automags.org/ubb/wink.gif

yeah!</font>


hehehehe!

[FeelTheRT]

<font face="Verdana, Helvetica, sans-serif" size="2">Originally posted by FeelTheRT:
from first to last..

1.) SFL Autococker
2.) Force 5 Autococker
3.) Emag w/ Warpfeed
4.) Angel LCD.</font>

no one else likes cocker? i detect a high level of biasty

[magman007]

OK MY DREAM GUN
minimag polished
Retro Valve
an elcd z grip(no such thing.......yet!)
smartparts silver shark gill sightrail
114 cu flatline tank
kapp gas through foregrip(silver)
warp feed (clear)
18v Evloution
freek barrel system(all silver accept for the insert)

[bornl33t]

dunno... pry a H&K mp5 holding stock... but I'm not all too familiar with this gun since it's only avalible to military and criminal justice...

[Magmaster430]

I would want a z grip emag custom adonized black and blue fade matching warp and boomie. flame drop 45k flatline and a blade trigger.
then i would get that proto trap door feed on a micromag body that has not been milled yet so i can get it milled to look awsome and so nobody can have the same mag

[SpecialBlend2786]

As soon as i get a X-Valve, ULE body and ULE trigger, i'll have MY dream gun :D Maybe a warp feed wouldn't hurt. And i'd probably get a sweet drop and a Nitro Tank.

[FalconGuy016]

Originally posted by Webmaster


er... One of the new ULE Emags Tom has cooking in Royal Purple, matching warp, 68/4500 Flatline, halo, and my custom designed "Magnum" ported BOA barrel.


Good job bringing up a thread from 2 years ago :)
But look at that! ULE from 2 years ago :) Ever get your dreamgun webmaster?
Blue-Black fade Xmag, blue halo, 68/4500 flatline, nice barrel kit of the day :) but with blue tip yes!

[minimag187]

I already have my dream gun :D :D

[TheJester]

well i already have a nice gun i can live with. but since we're making "x-mas" wishes. how about a hot girl freind who's good to me?


oh yea, it wouldn't hurt if she played either

[68magOwner]

Any free gun :D

[chizle97]

an AGD autococker:D

j/k It would be sweet to get my hands on a Y-griped x-mag. or a adrenalin imp w/ a giudence system that makes the ball track the player im shootin at and hit him in the butt. HEHE
or just a marker that dosent mess up when i pick it up.

[Ryknow]

uhh.. I honestly dont know what my dream gun would be.. I would really like to have a nice (mechy) cocker that never broke.. even though I dont think that is possible.

[Brett23]

Well I already have an emag. So I would want it black to red faded with a matching ule body and xvalve (following the color patterning) my rail milled out to resemble the lower half or the xmag. A ule milled battery pack. A new trigger (mines so screwed). A ule grip frame. A 68 4500 preset tank. Oh and an Eblade orracle

[edweird]

Tippman Hellhound.... BAH!

I say BAH! again


I will settle for nothing less than the beast that BradAGD and I were brainstorming... basicly a AGD inspired -real gatling- paintball gun mounted on a Warthog from HALO

[no_doz]

Im in agreement with zekewh on the color, Mt. Dew annoed dragon intimidator.

[canadaguy]

a powerfeed polished mag with a foregrip...........
thats it

[Cryer]

Originally posted by Miscue
What do you guys want?

Emag (Not X-mag:eek: ) with ULE Frame, ULE Rail, ULE Battery pack, Crimson X-valve, 12" Scepter, ULE Body, and a Black to Crimson fade anno (black at front, red at back to match Crimson X-valve) with HaloB dyed to match.

Datapimp Flatline drop w/ matching Anno, 88/4500 Flatline w/ Red Dye tank cover.
Also, I think I'd have the Pewter-annoed parts on the flatline reg re-annoed crimson.

[hAppy]

my dream setup

emag/xmag
-SS freak kit
-shocktech med drop
-warp

ill be hopefully getting an emag soon!
im trading my gun for a tricked out impy and hopefully i can sell that for bout 600 ish and get a used Emag for bout 600-700! so i can feel it in my hands already...

[SpecialBlend2786]

Those arm-mounted Hellhounds that Lord Vader suggested sound pretty good:p maybe a nice backpack that holds a couple hundred cases of paint and force feeds them into the gunss like a warp feed wouldn't hurt:D jk


actually i still stick with my MInimag once i get that X-Valve, warp, and ULE trigger

[Ov3rmind]

Excalibur: Half Milled, 1X Trigger
CCM Feedneck
DYE Sticky Grips
Powerlyte Scepter Kit
WAS Board and Eyes
SS Hose and QD with some of that Shrinking Black Tubing
KAPP Stubby DZIII
Freeflow 68 45 Adjustable Screw In (with DYE Cover of course)
Empire Reloader Revy

And every aluminum part on the exterior setup anodized in a thick glossy black.Mmmmmmm.:D

I'd also still love a ULE E-Mag, Angel Speed, and an E-Blade Hybrid.

[no_doz]

the hellhound cant be arm mounted, it is a suped up golf/go kart with a minigun style paintgun, grenade launcher, etc. btw the gun surely doesnt shoot 50 bps like it says, because all it is, is a full auto pb gun and barrels spin so that a ball goes out of each one when in a series. (sorry, im bored so i thought id throw in the side convo of the technical specs of the hellhound lol)

[elpimpo]

a dark lcd speed (when they come out)pimped out milling with a yellow fade, an 03 conquest tank, halo b, nice ace in it, evil pipe (matching ano)

[ugabiged88]

I want one of every gun!

[Torbo]

a black to blue new RT Pro. Black at the back, to go with the X-valve, custom milled, with the i frame annoed to match. a blue halo, a freak kit annoed to match the gun, a long blue SX10 cradle,and a 68/45 screw in. Plus of course a load of cool stuff like a new tank cover, and a couple new jerseys, some paintball pants, and shirts, and i really could use some new knee pads.

[FizNid]

I want an Emag or Xmag. The pewter Xmag is causing me pains of want right now so probably that one. I so hate not having money sometimes. :)


FizNid

[boggerman]

I would have to say a green to black fade, dust finish X-Mag with a matching warp and Empire Reloader, 68/45 Flatline, and an Evil Pipe kit. That pretty much covers it.:D

After that, I wouldn't mind having a WGP E-Worrlock, they look pretty cool with the little skull on the feedneck.

[oldsoldier]

Originally posted by edweird
Tippman Hellhound.... BAH!

I say BAH! again


I will settle for nothing less than the beast that BradAGD and I were brainstorming... basicly a AGD inspired -real gatling- paintball gun mounted on a Warthog from HALO
I get to drive.

[WickeDKlowN]

I have 2:

1) 2.2 Tribal Addicted w/ Chrome pattern(instead of red), ASP LPR adapter w/ Black Sonic LPR, Blade Trigger, MacDev ASA w/ MiniGauge, Black Gladiator reg, WM LPR Gauge, Tarantula Derlin Bolt & Ti Pull-Pin, Chrome Shocktech Long Drop, 88/3K Flatline, RED Valve, Halo B, Black CP One-Piece

2) All Black X-MaG, Shocktech drop, 88/3K Flatlinem Halo B, black .689 CP One-Piece

[nerobro]

Originally posted by Miscue
Dear Santa:

*snip*

What do you guys want?


A Westwood Autococker. As built by Danny Love. Back when a BBT autococker ment something and it wasn't a shocktech gun. It was a hand made custom gun.

I remember the day I first shot one. It's the day i got addicted to autocockers. It was a slightly cool day. We were driving my girlfiriends car. We went to pick up a guy I knew off of efnet.

Fast forward to the end of the day. I was down to a pod and a half of paint. And I asked loki if I could borrow his cocker for a game.

It was a BBT westwood milled autococker, with a 2 finger trigger, and all the fixings. In fact, as options goes it's quite simmilar to the gun I shoot now... just it was pretty.

It was sex in autococker form. A beautifully curved body in a day of straight cuts and what looked like mathmatical designs. This body had curves. And then there was the way the thing felt. The mechanical bliss of a ferrari's gated shifer as expressed in a sliding trigger. I didn't feel fast that day, but it had a nice bouncy trigger spring. My experience only soured by a barrel that came loose midgame and a .688 barrel that wouldnt' shoot clean.

it was the frist vertical feed gun I ever shot. the next vertical feed gun I'd aquire would be the dragun black that's on the floor next to me now.

I still want one of those guns.

[WickeDKlowN]

Originally posted by nerobro


A Westwood Autococker. As built by Danny Love. Back when a BBT autococker ment something and it wasn't a shocktech gun. It was a hand made custom gun.

I remember the day I first shot one. It's the day i got addicted to autocockers. It was a slightly cool day. We were driving my girlfiriends car. We went to pick up a guy I knew off of efnet.

Fast forward to the end of the day. I was down to a pod and a half of paint. And I asked loki if I could borrow his cocker for a game.

It was a BBT westwood milled autococker, with a 2 finger trigger, and all the fixings. In fact, as options goes it's quite simmilar to the gun I shoot now... just it was pretty.

It was sex in autococker form. A beautifully curved body in a day of straight cuts and what looked like mathmatical designs. This body had curves. And then there was the way the thing felt. The mechanical bliss of a ferrari's gated shifer as expressed in a sliding trigger. I didn't feel fast that day, but it had a nice bouncy trigger spring. My experience only soured by a barrel that came loose midgame and a .688 barrel that wouldnt' shoot clean.

it was the frist vertical feed gun I ever shot. the next vertical feed gun I'd aquire would be the dragun black that's on the floor next to me now.

I still want one of those guns.
Can you say obsessed? lol jk. You went into WAY too much detail on that one...

And idsnt it called a Black Dragun, not a Dragun Black?

[nerobro]

No, it's a Dragun Black. It's Pre M3. It doesn't need a "vertical elbow" It's actually built off the same bodys that the JT guns are made on. So it's fatty striker, and had a baretta style frame.

and no, that was not nearly enough detail.