Problems with older Automag

[magboySK]

I'm having a problem with my Mag having a really sensitive trigger pull and it will go full auto and chop up a bunch of balls. I've tried to change the sear, bolt, all seals and the on/off pin and am at the end of my rope. Does anyone have an idea what I could do to fix this. I've had the Mag for 7 years and this is the first time it has given me problems which I can't fix. Thanks.:confused: :confused:

[pip_999]

well man u said that u did try the trigger sear

because i have had this problem it might be becase your trigger sear is not connecting to teh piece in your vavle that catches the bolt
so it going fully auto

or sumtin, just adjust teh trigger rod back a bit and see what happens

[PyRo]

I'm thinking either your bolt is worn, or your trigger rod is out too far.
Make sure the bolt edge isn't work down too much.
Also make sure when the gun is gassed up and the trigger is pulled all the way foward, the trigger rod doesn't touch the trigger. It it does this could be the cause of your problem.

[paintsprayer]

you should check to see if the bottom of your bolt is worn or if that piece that catches the bolt is worn.