2 quick questions

[Stimpy]

1)Velocity adjusters: i see the large thumbwheel adjusters, but i can never find out where to get them...can someone answer my question?
2)oil: when looking at the bottom of my valve, i see the laser-inscribed word oil, but im not sure where/how much oil to put in what hole?

[MikeCouves]

Well putting oil in those oil holes doesn't really do that much. The best way to oil your mag is to put 3-4 drops of oil in the ASA closest to the valve (inside a quick disconnect, ASA for screw in tank, macro line, etc).

Also, the thumb velocity adjusters are a common add-on and can be find at most of the online stores and your local store if you have one.

Here's some of the onlie stores.

Modified Paintball (http://www.modifiedpaintball.com)
PB Gear (http://www.paintballgear.com)
888 Paintball (http://www.888paintball.com)
Canadian Paintball (http://www.canadianpaintball.com)

There's many more that's just a couple to help you out.

[PyRo]

I wouldn't bother with a tumb ajuster. You really don't need one unless you plan on changeing your velocity during a game. You should only have to set your velocity once, and it should stay about the same untill you move the nut, or use a differant size paint/barrel.