Drop forwards/Cradles

[FrAuStY]

I was just curious what drop forwards and cradles would actually work with the Flatline 68/3k tank and regulator. I checked out Kapp's Dropzone 2 and it looked like it'd work but I don't want to spend 50$ if its not going to work. I thought I saw a mag with this DZ2 and what looked to be a Flatline nitro but the pic was so dark I couldn't be sure. I kinda wish the dropforward on the flatline was about 1.5" longer and about .5" lower. :mad: Are there any others out the besides the DZ2 that will work? Thanks for your input peeps :D

[krafty]

You can buy this dovetail adapter from AGD...

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=156&CATID=3

...and then you can use any d/f you want that accepts a dovetail.

[FrAuStY]

I appreciate the link and the thought...but I really have my heart set on the DZ2. I think I'm gonna go ahead and get it and if it doesn't work..I'm sure someone would buy it at a field lol. If anyone else knows or has seen a Dropzone II cradle on a Flatline system please let me know.. Keep on slapping.

[MikeCouves]

You can clamp the DZ onto the silver part of the tank. The silver part is behind the reg but infront of the tank, know what I mean? Then you run the hose to your valve or whatever you have.

[FrAuStY]

Ok... I've asked..and no one can give me a yes or no answer...here's my deal.. take a look at this pic..

Drop zone II on a flatline tank (http://www.automags.org/resource/gallery/rt/rt24.shtml)

Is that or is that not a KAPP dropzone II cradle on a flatline tank system? I don't know who's RT that is..but I need to know if there were any mods done to make it work? 55$ is a lot to just toss out if it doesn't work right.. :( Please someone if you know that it'll work with no drilling or honing let me know por favor!! :)