intellframe error!HELP!

[magman68]

my intellframe runs into my 32 degrees foregrip.i have tried everything!what is there to do?

[Quiet]

There is the tried and true method of using a rail extender or you can use a 15degree ASA, I suppose. There is a thread that lists some foregrips that fit.

[sifu01]

KAPP does make foregrip extenders that attach to the rail so the grip is further away from the grip frame.

[drx975]

are you kidding me...i have a 32 degrees foregrip and man i want an intelliframe. holy **** just another thing to piss me off. Is this a gas thru grip that u use?

[drx975]

I checked the thread and they said that a 32 degrees foregrip works...strange...on my gun it seems that the frame could run into my foregrip but i dont know, ill just get the frame and find out, or go to a store and try it.

[mikey101]

If it doesn't fit, you could always do what i did, cut a slice out of the grip!:p I was just an old pmi perfect ex-chamber, which i needed to play the next day so i grinded it down with an angle grinder:D (Don't do this, unless you want an ugly grip!)

[MikeCouves]

Use a foregrip extender or 15 degree that will work.

A guy made me a custom one and it works awesome.

KAPP Gas Thrus and Front Handles Work
DYE Gas Thru
Smart Parts Handle and Gadget Grip's Both Work

[krafty]

Originally posted by mikey101
If it doesn't fit, you could always do what i did, cut a slice out of the grip!:p I was just an old pmi perfect ex-chamber, which i needed to play the next day so i grinded it down with an angle grinder:D (Don't do this, unless you want an ugly grip!)

:) I did almost the same thing. I had to use a dremel (and since I own one, that makes me an airsmith, right?) to mill off a bit from my benchmark foregrip in order to get it to fit.

[wimag]

ACI vertical adaptor and a KAPP gas through foregrip work perfectly

[PRPB]

I have been looking all over the place for a 15 degree asa. Where can I get one.

[Autotrigger]

I made the 15* angled asa for my Minimag, but Dingo sells them! I have also modified the mounting screw hole on mag rails before and moved the vertical asa forward about a 1/4 inch!

[PRPB]

:confused: Who is Dingo? :confused:

[luke]

I have also modified the mounting screw hole on mag rails before and moved the vertical asa forward about a 1/4 inch!

Autotrigger,
That's what I was thinking about doing, does the fore grip wobble at all?

[jbgoneover]

Take a look at my post...How to Intelli without Intelli...
It might work for some of you..

[drx975]

Hey Im not even buying an intelliframe for the intellifeed. Im getting one for the higher ROF and better feel. Plus looks :D. The reason im not intellifeedin is cause the ricochets dont need an intellifeed system, the ricochet intellifeeds in its own way :).