RT Bumper question

[gimp]

Well, I havn't played for a while, and I'm gonna be playing pretty soon. After inspection of my marker, I noticed one thing that could pose a problem. The Bumper (the flat o-ring in between the bolt and the valve) is worn. Right in the center of the o-ring, it's worn, so It's not tight against the powertube, it's a little loose. I don't have any air so I can't try it out. Do you guys think this will be a problem? I could order another one, but I want to wait till the 90degree warp feed adapters are in.

Thanks!

[hitech]

It is just there to keep from haveing metal to metal contact between the bolt and the valve body. If it appears to be capable of keeping that from happening I wouldn't worry about it, for now. I would replace it when I had the chance.

[BlackVCG]

As long as it's on the valve and not completely cracked in half, it's fine.

[Shockerman]

Your fine until it has enough slack to get stuck by the bolt traveling backwards, then your in trouble.
You can get a new one in a Parts Kit.
Hope this helps...:cool: