I have Another WARP Question

[Jason Reed]

How do I "Make sure to follow the breakin procedure for the warp motor. Set the dwell jumpers so the warp turns 1/4 turn each time you fire the marker." I didn't get instructions on my warp. I am also interested in Intelli-linking it to my i-frame. would this be a good idea.

[BlackVCG]

Take a 9V that you have laying around the house and put it in the Warp, take off the back plate and turn up the blue sensitivty adjuter all the way and let it run until the battery is dead. That will break in the motors carbon brushes.

Next, in the block of four jumpers on the right of the board set two vertical and two horizontal.

Go here to get the Warp manual and Intelliframe to Warp tutorial. Yes, it's a good idea to intellifeed your Warp. Just take your time doing it so the setup is good and you won't have problems with your connections breaking loose while you're playing.

http://www.airgun.com/manual.shtml