BLADE TRIGGER for E-Mag

[Timmy63]

Well it has been talked about quite a bit here on the forum and the other guys on the team have been begging me to make them, and so I did. Here are some pics of the blade trigger I have created. If you like it let me know. I need to get a good response and I need to know that it will be worth my time and effort to make a bunch and sell them.

If you’re interested post here and let me know. I will see what I can do to make arrangements to make a bunch of triggers.

…and yes they work and they are fully adjustable!!!

[Timmy63]

Another pic

[Timmy63]

The last one

[FaSSt]

How much would you charge for these? Are these a simple drop-in replacement? Do they come with a magnet?

I am particularly interested because I managed to strip the tiny magnet adjustment scew out in my Emag trigger and have been too lazy so far to return it to AGD.

Anyway, I am definitely interested.

[Timmy63]

I am not sure about price yet. I am going to look into it this week. I hope I can make it inexpensive enough for you guys to afford and still allow me to make a few cents.

Also, they will come with magnets in them and can be dropped right into your gun. All you have to do then is a minor trigger job.

They work awsome, all of our team has been using them for about 2 weeks now, and we have found no problems.

[Blennidae]

I'd be interested if the price isn't too bad.

[Top Secret]

Looks nice. Did you modify a intelliframe blade trigger to fit? I'm very interested.

[Timmy63]

No, I did not modify an existing trigger.

I am a CNC machine programer and I made the triggers from raw chunks of alluminum.

[Load SM5]

I'd be interested.

[Clare]

me too! depending on how much it'll be, as well.

[Johnny Bravo]

I'd be somewhat interested.

[Kaiser Bob]

My question would be how do you adjust the magnet that triggers the HES?, if it isnt difficult, im interested :)

[dropkick1]

my friend will take one.

ken

[Timmy63]

I don't exactaly want to reveal my secret quite yet but the trigger is adjustable very easily. Put it this way, if you can do a trigger job on the trigger in your e-mag now, you won't have any problem doing one with my trigger.

[Tunaman]

Whenever you are ready. I would like 5 or more. Thanks. OH...nice job!

[Bonx0007]

count me in!!!!

[Timmy63]

I like seeing the responses. Keep them coming.

When I get more info on how much I can afford to sell them for I'll post that here and/or probably start another thread. I am pretty sure the price will be under $50.00. Let me know how that sounds to most of you. If I can make it cheaper I will certainly try. I'll let you know by the end of the week.

Remember the better the response the quicker I'll get the ball rolling on this. I'm just as excited about it as you guys are.

[TITAN]

count me in... i'll buy one as soon a i sell my Brand New 2k1 Shocker 4x4 and buy and E-Mag or trade my shocker for one with some cash:Dthese look really good and i will definatly buy one

[Cypres0099]

After having a blade Intelliframe on my normal mag for a while I have been hoping someone will make them for the Emag.


I'll take it!!!!! :)

[Sledgehammer]

Looks really nice, good job!!!

But I still don't want one, Igot a triggernomics blade trigger :p

[MajorDamage]

I'll probably take one! Looks real good! I think somewhere around the $40 area sounds right, more if magnets are included I guess. I'd sell them without the magnets tho, people can jsut throw their other magnet in there.

ENDO!

[Scooter/Cootie]

Way to go bud! Looks like the triggers are a hit! :D

Got to say that I absolutely love mine. It has an amazingly short pull and its extremely easy to rip. You did a great job and the quality is definately on par with AGD.

[Chupas2]

Can I get a Titanium blade trigger.:D :p :D

[veteranmag]

That trigger looks great, I could never get comfortable with the shape of the standard trigger. Now if you can only make a lightened rail and a slimmer, lighter trigger frame!

[BTAutoMag]

looking very nice

[vf-xx]

I'm interested.

Are the triggers buffed at all? how sharp are the edges?

Let us know when you have these up for sale. We'll get in line ;)

[[FE]Memnock]

Damn, that is some nice looking work. Very good job. I live to see stuff like this. I also would be very interested in getting one. They look great. Thanks for taking the time to get something like this going. Great job.

-Mem

[scarpa43]

If the price is not through the roof I would want one.

[Chupas2]

Can I get one made out of wood. Please!!!!!!!!!!:D :D :D :D :D :D

[Automag ReTro]

I'm definately interested.

[keiphers]

Count me in. I'll have an Extreme Emag in September.

[Warewolf50]

I would get one if the price wasn't to bad.:D

[drboo]

I would like one made out of epoxy and butch's fingernail clippings, then maybe i can shoot 13bps!!!

No seriously guys, I shot Scooter's (AGD Pride) Emag with the blade trigger on it at college nationals and it was beautiful. All of you NEED these, they are exceptional.

Timmy obviously I want one, but I'm sure skirts already told you that.

-Colin

[magking1971]

That's triggerific!:rolleyes:lol
Yes, I'll take one for sure.

[BlackVCG]

Put me down for one.

[DryIce]

id like one if the price was right

[oldsoldier]

Blackvcg just sent me to this thread...I am very interested in the blade trigger. PM me and let me know if you have them available, how much...etc.

[Bonx0007]

as long as these are perfectly interchangable I want one. As soon as you have them made and priced please e-mail me the info I will definitly buy one.

[Threewheeler]

Depending on the price, I would like one.

Three.

[OnyX]

definately interested

[spacemanspiff]

Yes I would deffinetaly like one. Awsome job by the way.

[Smiles2480]

hey i would take one. i would also want a green led screen for my mag if they are stiil out there. then my emag would be something really out there.

[magman007]

il take one right now! great job

[spacemanspiff]

Any word on when we can order these?

[Timmy63]

Sorry for those of you who have been wating for so long. I've been super busy and I finaly have time to work on the triggers again. They should be ready in about a week or so.

For those of you who have stated their interest on this thread I'll send you all PM's to let you know how to get triggers and post it here on this thread.

Thanks for waiting, you won't be dissapointed with the triggers.

[Bonx0007]

very cool!I can't wait

[Top Secret]

Please AIM or PM me, I'm EXTREMELY interested.

[G-Rexx]

Timmy, I'm in for one.

[Bwaites]

I'm interested, too.

PM me when available.

Bill

[Timmy63]

Triggers are done and are $30 bucks.

If you have responded to this thread you can expect a PM with contact information. If you have not responded to this thread PM me and I will tell you how to get a trigger.

Thanks everyone for waiting.

[Blennidae]

$30 sounds good to me. I'll patiently wait for my PM.

[RT_Luver]

I dont know...but I'm just not a very big fan of the blade trigger. they dont really suit me. I like the feel of the conventional double look myself

[Load SM5]

My money order will be out tomorrow. Thanks!

[Cypres0099]

Great! Do you take paypal? Also, can you tell us how you adjust the magnet now? Do you just reach back there and twist it?

[Timmy63]

I do not accept pay pal nor do I take personal checks.
I will be accepting cashier's checks or money orders only.
PM me and I'll give you all the info.

As far as adjustment, it is very simple and I have an instruction sheet made that I will send with every trigger.

[Timmy63]

Originally posted by RT_Luver
I dont know...but I'm just not a very big fan of the blade trigger. they dont really suit me. I like the feel of the conventional double look myself

I understand, the blade trigger is not for everyone, but I urge you to try it if you run accross anyone who has one of my triggers. I didn't think I was going to like it myself at first! But now I love it!!!

[paintbattler]

those are NICE. but unfortunatly i dont have an E-Mag

[HarryM]

looks really cool Tim..good job

[manike]

Way to go Timmy63! I received the blade triggers in the post this morning and I have to say they look to be very high quality. Even down to the little presentation box they come in. A nice touch!

They got here very quickly considering I am on the other side of the pond :)

Now time to install...

manike

[Load SM5]

Your's came in a presentation box? Mine came in a small bubble wrap bag. Here goes the whole box thread again.:D

[manike]

Hey Load... while you are around... I need some grips :) to match the gun, what do you think would look good?

I guess I got the presentation box to confuse customs and cos I'm special? :rolleyes:

manike

[Load SM5]

Well Mr Special Person, I had started a pair for you but had a question before I finished them. I sent you PM but never heard back and sold the grips to someone else. I can have some by Shatnerball if you want. Have anything in mind? What color is your Extreem going to eventually be?

[manike]

Originally posted by Load SM5
Well Mr Special Person, I had started a pair for you but had a question before I finished them. I sent you PM but never heard back and sold the grips to someone else. I can have some by Shatnerball if you want. Have anything in mind? What color is your Extreem going to eventually be?

you are kidding right? I always reply to my PM's... I'm gonna go search and see if I missed something :( gutted.

Well I was thinking for my C&C, could you do clear grips fading to black to match the ano? is that possible? maybe slowly lower the grips into some dye or something?

The manik-e-mag may have a few major mods to the gripframe which would require even more 'special' grips ;)

manike

[Load SM5]

So you just overlooked me then? Well I see now where I rate.

I have'nt tried a fade yet but I'll bet it would be that hard. I'll give them a shot. Black on top fading down to clear?

[manike]

OMG. I just found your PM and am stunned, how did I miss it? I'm seriously gutted!


Originally posted by Load SM5
I have'nt tried a fade yet but I'll bet it would be that hard. I'll give them a shot. Black on top fading down to clear?

Fade either way would be cool. I think it won't matter much, it depends on what air system I have on it... one is pewter and the other is black :)

Fade grips would be hella cool to match the fade anno... :D

manike

[Dragoon]

Timmy,

Drop me a PM with your info and I'll get a Money order out ASAP.

Douglas

[Dragoon]

Okay, okay I get it!!

Timmy,

I only just installed the trigger this morning. Wow!! I haven't put any paint through it but it feels great. I've not been one to sit around an dry fire alot. but in the space of a couple of miniuts I've ended up putting over 1000 shots on the counter!! I'm walking the trigger and I've never been able to do that well before. At the moment I'm using your trigger with one magnet and it feels great.

Now I understand why people get so excited dry firing!

Douglas.

[battlegroup]

Can you make them without the finger groove at the bottom? Still have it flare slightly to the front at the bottom but without the curve towards the back of the gun?
In other words the back of the trigger is a straght line down and the front has a slight curve at the top, a staight line down, and a slight curve at the bottom. I can draw a pic if you need it?

[boggerman]

I am very interested in one of these. I have a blade trigger i-frame on my minimag and I love it. I just bought an emag and it seems that it would be a great upgrade. Timmy63, pm me the info and I will send out the $$.

[TippmannMan]

make this a classic thread :D

[Dragoon]

Looks like this thread is getting a bit of a revival!

[TippmannMan]

wheeeeeeeeeeeeeeeee go revival. yes this post has relevance :) is AGD thinking of making this an option for future mags?

[boomerfoxtrot]

I'm in ...

[Psycho Chicken]

As soon as i gt my extreme i'll be placing an order

[Boble86]

I would like to buy one.

[oldsoldier]

One of you may want to PM or email him...he hasnt been posting lately.

[boomerfoxtrot]

yeha, I PMed him... is he no longer making the blades?

[ChucktheMAGician]

I'm interested too! Anybody w/ info would be greatly appreciated.

[Timmy63]

Hey everyone,

Sorry I haven't been posting lately. I have been checking my PM's and that is the best way to get hold of me. I'm glad to be getting such a good review with these triggers and soo much support here with the AO family. I am very happy to hear soo many people like them.

For the record I still have triggers left and also I am now accepting pay-pal. If you are interested please send me a PM.



battlegroup- I have all the triggers made already so to do a trigger with any modification would take too much work for me right now.

Thanks again everyone,

[HIKARU]

if you were selling these blade triggers about a month and a half ago.. i think my friend with an emag bought one of these.... 2 words for it.

BUY IT!!!

very nice quality, adjustable. and comfortable.

[irs709]

ive seen one of those befor...they are vvvery good feeling...up for a good gun

[FESTUS33]

Go Timmy Go
:cool: :cool: :cool:
I still LOVE mine, probably
the BEST upgrade to my mag
short of LX.
All nonbeliever's really got
to try one and be converted :D
P.S. Timmy
any word on my battery pack:rolleyes:
P.M. me and let me know.
Hope you had a Happy Thanksgiving.

[boggerman]

Got my blade trigger from Tim, he is a great guy to deal with. He sent it out very quickly with good instructions for installation and adjustment. Of course, now that I have it installed, it will be months before I get to play again as winter has set in here in Colorado.

:D Thanks Tim!:D

[maglover52]

im geting an emagn soon and im interested how much are they?

[HYPER]

sorry to blow your bubble.

i have been wanting one of these for a long time. however, i recieved a pm from timmy63 couple days ago. production for the blades have stopped temporaily. he wont be able to pump any out til late fall or early winter.

when that time comes, u can bet ill be ordering one. until then my double is just gonna have to cut it.

p.s. grinding/sanding your trigger into a blad isnt the same, the tl63 has more adjustment, it has a front setscrew to remove front play.


-HYPER

[PzYcO]

Good job resurrecting(sp?) this thread! High Five Luver! :o :o :o

[Outlaw5]

Timmy, heard you aren't making any right now but as I have just picked up an X-Mag XT-00206, I will be wantin one of your creations. Please let me know via E-mail at [email protected] Thanks for your time.:cool:

[MoBiLe]

i'll be wanting one of timmy's blade triggers also
is grinding and sanding the emag double trigger into a blade trigger bad?

[Psycho Chicken]

Hey timmy, I would also like to get ahold of a trigger. Hopefully you have a couple of them still laying around. If so you can email me at [email protected] I can't do paypal, but is certifed c heck or money order alright?

[crankydan]

Hey Timmy,

Lets get those blades cranking. I think you will get the support from buyers right here!

What do you guys think? Who wants a TL63 blade for their EMAG? I know I do.

crankydan;)

[Bad_Knees]

You can put me down for another!:D

[RoadDawg]

I want one real bad. I can't stand groove triggers anymore.

[Psycho Chicken]

I'm still all about getting one. I love my xmag, but can't stand the trigger. I'm bout ready to bust out my a dremel and improvise one. Only prob with that is it stll won't be as ajustable as a tl63.

[Timmy63]

ATTENTION:

For those of you who find this thread in search of a blade trigger for and e-mag, x-mag, and/or sfl, you have found the right place. Unfortunatly I am all out of triggers right now. If you PM me I'll put you on my list and if I have any time this winter I will try to make more. If I am able to make more I'll be sure to post about it.

For those of you who have purchased my trigger already I thank you very much. It is because of the incredible reviews that I keep getting that more people keep wanting triggers. I can't thank you enough for enjoying my triggers, it means a lot to me to know that I am able to make something everyone likes so much.

[JT2002]

i think when you make em you will again make a killing lol

[nato]

Good job man! I'll take one... One suggestion, edit your 1st post and put down the price so people dont have to scroll through to find out... better buisness;)

N.A.T.O.

[terrorizer666]

Dropped you a PM :)

[845]

I will be ineterested pretty soon but do these work in manuel mode?

[Spartan X]

hahaha, I already have a TL-63 trigger on my X-mag!!!

[Tobe2be]

hey i want 1 for sure and maybe another one not to sure bout the second one but put me down for one for sure

[A to the G-Dizzle]

Hell yeah put me down for one.

[Outlaw5]

Timmy, As before in this thread....One I must have?!! Please place me on your list for one of your amazing creations. Additionally, I PM'ed you. Thanks and the anticipation is like heinz 57...It's makin me wait....:D

[Mickster]

Add me to your list mate, just need me emag to arrive in the post :D, ill pm when it arrives

[bmexline]

add me to the list