PDA

View Full Version : Retro Valve on/off pin question


prowler
05-13-2002, 07:01 PM
I'm new to Mags so correct me if I'm wrong...

I am assuming that the length of the on/off pin affects the reactiveness of the trigger. My question is HOW does it affect the reactiveness?

Would a .750 pin be more or less reactive than a .745 pin?

What about a .740 pin?

Hopefully someone can clear this up for me.

Thanks!
TransMan
05-13-2002, 07:42 PM
the longer the pin the more reactive the trigger will be
but if the pin is too long the gun wont shoot correctly if the pin chips a little it will cause it to go full auto hope this was of some help
prowler
05-13-2002, 08:45 PM
Yes it does..

thanks!
Yama
05-13-2002, 08:52 PM
so if i put a RT on/off pin in my classic valve, it would make it more reactive?
a_malfunction
05-13-2002, 09:50 PM
A longer pin will make the gun less reactive. Shorter pins make it more reactive. And no, putting an RT on/off pin will not make your classic reactive. The on/off pin isnt what makes the RT reactive.
TransMan
05-13-2002, 10:48 PM
my bad malfuction i got em backwards :rolleyes:
a_malfunction
05-14-2002, 10:39 AM
You are forgiven. :)
soilent green
05-14-2002, 10:47 AM
on/off pin for RT can't be put in a classic nor would it make it reactive their is 2 seperate air flows on the rt the classic only has one the rt has one for the firing of the balls and one for the reactiveness (someone correct me if I'm wrong)