Connecting 2 9 volts to warp

[E==Mag MAN]

okay if i was the cut wire in warp attack another 9 volt connecter so i ran 2 9 volts at a time would it hurt my warp.

[HoppysMag]

yes you would get MBS ( magic blue smoke) you would need to put a resister in there to regulate it down to 9 Volts in stead of 18volts

[CleenSweep]

It really depends on how you wire the batteries up. If you piggy back them it will still run at nine volts you will just get double the battery life before you have to replace them. Crosswire them and poof!!!

By the way, here's a good website. warp feed mods (http://my.voyager.net/~nator187/WFmods.htm)

If you decide to do a 12v mod you will either have to just turn the sensor off and intellifeed it (because it will never stop running) or do what I did and put in a filter to stop voltage spikes.

[lopxtc]

I run two 9v's on all of the warps I have ... simple process to hook up and helps extend battery life. Check out Petty Paintball for the two best Warp Mods;

Dual 9v mod and on/off switch mod. (http://www.pettypb.com/timiwarp.html)


Aaron