Leak down the Barrel

[venison]

Guys i'm sure you have answered this a thousand times but I gotta ask. I just recieved a RT valve for my 68 automag.I use a preset ACI compressed air tank. When I screw the tank on air leaks full pressure down the barrel.
I am not an expert on the RT Valve but i took it apart and checked the o rings made sure it was lubricated used the smallest spacer. and still when i put the tank on, air down the barrel. I changed back to the stock valve no problem. Can any one help

[Steve Crush]

put straight shot down barrel, hold bolt back while turning the air on. common problem. I had that problem with the old RT had a maxflow on it. Was told max flows turn on to slolwly to try and get a flatline system cause they turn on much faster and fixed the problem for me.



steve

[Will Wood]

It could be your power tube spacer...I think it is
Bolt Stick=Shorter
Barrel Leak=Longer

I'm not sure, I'm new to mags, you should check.

[MINIRETROMARK]

get a slide check or get a proconnect. rt's need that instant surge of air to push the on/off pin and if that does not happen air leak out of the barrel.and check your powertube spacer that would help.

[a_malfunction]

Just hold the trigger down as you gas it up. A much simpler solution. :)