My Reactive Trigger could be more reactive...

[cooltot]

So what do I send in to AGD to get it reactive as possible?

[echoes]

Well first, what pressure are you putting into the retro valve? If it's too low then it might not be reactive enough for you. I think AGD recommends about 700 psi input, and you can increase or decrease that to get you the reactivity that you're looking for.

[keiphers]

I like around 850 or 900 psi... mmmm... very reactive....

[cooltot]

Well it's around 850 psi. So what can I send in?

[keiphers]

You can't send anything in to my knowledge. Maby you need a smaller Spacer. Also, turn the pressure up even higher... like say 950. It should be pretty reactive right now.

[athomas]

A longer power tube spacer may make the trigger a little more crisp. A shorter on/off pin will make the valve more reactive.

[complicationjack]

mike, what are you talking about!?!?!?!? your mag rocks...it's a-plenty reactive...but yeah the only thing you could do is get a different size on/off pin because you have a preset...but that sounds like trouble to me...wouldn't that screw up the valve (possibly not sealing the air off quite right?)

btw mike...im trying to get a retro right now from donna...i just want it in reverse for my mini, so im causing her trouble...:D

-dave

[cooltot]

Thanks Dave, I like my mag too. Panzerr was saying to me I can send my gun in to AGD and request a custom on/off pin job. They'll do it for free, and I just gotta pay for the postage. He said he did that and his RT was maximized to its full potential.

[cooltot]

And Dave...Donna is easily troubled, tell her I said that too :D