PDA

View Full Version : I have drank from the holy grail....


Butterfingers
05-23-2002, 12:37 PM
WOW!

2000 Rds crappy oblong 1 yr old 0-1 bounce sticky slimy brand X paint not one break in my retromag. Guys taper your bolts it works wonders.
Will Wood
05-23-2002, 01:04 PM
....And would you care to tell us how to do this?
iisp0tii
05-23-2002, 01:22 PM
i would like to know how to do this also
Havoc_online
05-23-2002, 01:30 PM
my gun will shoot klumps of mud and ask for seconds!
Jonno06
05-23-2002, 01:35 PM
i went through 450 rounds yesterday non stop shooting,i chopped ONE....b/c my revvy was "off"..:rolleyes:

Tapering your bolt is sanding down the edge of the bolt which will cut the ball waiting to be shot...(not the one in the breech..the one ight after it.)

the bolt will barely hit the waiting ball,and cut it alil,then when that ball is fired,it will blow into pieces...leaving paint cluttered in your barrel

if you sand down the edge it will not cut this ball,and it will be easier on the paint.....(right?)
Strider
05-23-2002, 01:57 PM
Here is the mod he is talking about:

http://www.automags.org/forums/showthread.php?s=&threadid=32839
ShooterJM
05-23-2002, 02:07 PM
Originally posted by Butterfingers
WOW!

2000 Rds crappy oblong 1 yr old 0-1 bounce sticky slimy brand X paint not one break in my retromag. Guys taper your bolts it works wonders.

Isn't it great! I'm considering tapering mine down further, don't want to ruin a bolt though.
pumpamatic
05-23-2002, 05:21 PM
Ok, so this post inspired me to do a better job on my bolt, WOW, I just shot about 400 old 3 month crappy Big Ball, broke balls in breech even when they were fresh, 2 breaks, one with revvy off, the other, powerfeed plug not in all the way. I thought for sure the last time I shot crappy Big Ball in 60 degree weather I was going to need a foamie bolt. If only so many of them weren't dimpled every single one would hit the mark.
Butterfingers
05-23-2002, 05:32 PM
I forgot to mention its a SS foamie bolt.
Butterfingers
05-23-2002, 05:41 PM
Originally posted by Butterfingers
I forgot to mention its a SS foamie bolt.

My plastic nubbins are filed down a bit too.

The breach of the barrel was also polished.
personman
05-23-2002, 05:51 PM
wait, is it the outside edge, or the inside edge?
Butterfingers
05-23-2002, 05:55 PM
Originally posted by personman
wait, is it the outside edge, or the inside edge?

Outside edge.
personman
05-23-2002, 05:57 PM
ooh.. lol I couldnt make sense of it.
Jonno06
05-23-2002, 06:44 PM
how do you know where to sand it,b/c my bolt all looks the same....
toymyster
05-23-2002, 07:06 PM
I told you, it wroks miracles!!! And all who are still wondering, it's the outside edge you taper!!! I'm going on 10 cases of cheapest paint I can find and still no breaks!!!
Butterfingers
05-23-2002, 07:12 PM
Originally posted by toymyster
I told you, it wroks miracles!!! And all who are still wondering, it's the outside edge you taper!!! I'm going on 10 cases of cheapest paint I can find and still no breaks!!!

you sir are a saint!
Schnitzel
05-23-2002, 08:28 PM
this is good news. i just got done with a project at school that involves a CNC lathe. i can just pop it in and go...sweet.