Intelifeed

[sk8dood]

Does anyone know how to intelifeed a bushy to a revy? or to a warp feed? if you do please tell me how. Thank You.

[RT_Luver]

post this in the tech forum. it'll get more of a response

[chw32587]

i dont think u can intellifeed a bushy but i might be wrong.. cuz my sear pin has to hit the roller switch wish spins the revy and i dont think a bushy has a sear pin

[personman]

I think If you tap the right wires or something, you could do it..

[chw32587]

yeh.. there might b a way..

[keiphers]

When I had a Bushy, the only responce I ever got was buy the kit, but I never found the kit.

[AssassN]

Do a serch i read something about it here.

[Vegeta]

I dont know much about busshies but you could alwaus goto radio shack and get a low voltage relay switch and tap it into the solenoid wires (paralell, not serial). That way, everytime voltage passes down the solenoid wires it trips the relay switch. from the relay you could run your wires to the revvy like you would with and inteliframe.

The relay probably wont fit in your grip frame, but you could always run the tapped wires from the solenoid to the revvy, and mount the relay and those wires inside or glued onto the revvy. But I am not sure what efeect taht will have on solenoid power or battery life, becyse if you run the tapped wires from the solenoid all the way to the revvy, taht might be drawing some amps fron the solenoid line. If hte wires to teh relay were shorter and it was contained in the grip or near it, it might not draw much, if it ever takes any. You will jsut have to test it and see.

[paintbattler]

Originally posted by RT_Luver
post this in the tech forum. it'll get more of a response
yea u prob will get a better response