Retro Valve Problems

[Merlin24]

Air is leaking from between the two pieces of the body. I have replaced all the o-rings and oiled the o-rings.

It shoots while it is leaking air but will not stop leaking.
I have run out of ideas. Please help.

[RobAGD]

Humm you have a leak.

You need to hunt it down with some soapie water and look for the bubbles.

There is a Fat reg body oring that keep the air from excaping in the manner your discribing, but I dont thing that you are actually getting teh leak from there.

-Robert

[BlackVCG]

I'll bet your reg. valve pin o-rings are bad. Replace those o-rings if you haven't already. If you have, replace the entire assembly and try again. There's two o-rings on the end with a plastic spacer in the center. Yes, the plastic spacer is suppose to have a slit in it.