PDA

View Full Version : Shocker question


Krazy Ivan
06-10-2002, 07:18 AM
Just one, - Can I run a shocker off of my high pressure max flow if I put a secondary reg in-between the tank and gun?
Krazy Ivan
06-10-2002, 09:48 AM
up...Nobody knows???
Curly
06-10-2002, 10:06 AM
Yes this is posssible but i believe the secondary reg needs to be a low pressure max flo.
boltsmack
06-10-2002, 01:43 PM
Im pretty sure you dont even need a secondary reg, the high pressure max flo should go low enough, someone at my local tourny scene does this and it works fine.
Kaiser Bob
06-10-2002, 01:49 PM
If it can go under 250 you are fine, otherwise you will have problems.
Krazy Ivan
06-11-2002, 07:10 AM
The max-flo I have has 2 springs, a high pressure spring, which will work from 600-900, and a mid-pressure spring which is 300-600, and no I can't put a low pressure spring into it because the reg is a totally different size for the spring inside.

I ask because I was looking into buying either a new or used shocker, or a new Intimidator. Working on a slight budget, like 600, so I found new timmy's were 588, and new shockers were 529.