Best upgrade for classic Mag

[bvansickle3]

I have a classic Automag running on CO2. I have an aftermarket barrell and an X-chamber already.

I'm looking for the next "best" upgrade for my gun, or at least some suggestions as to what to do next.

I haven't been around paintball for a few years (i used to play alot but it's probably been 2 years now) so I'm not really up on the latest and greatest technology.

Any suggestions are appreciated!

thanks!

[covadsucks]

The best upgrade would be to get yourself a compressed air or HPA/nitro tank. After which I would recommend a Power feed body and a dropforward for the tank if you don't already have one.

[Polishpickles451]

definatly the nitro is first priority. A mag on co2 is preforming to %50 potential.

[InvisibleBill]

Originally posted by covadsucks
The best upgrade would be to get yourself a compressed air or HPA/nitro tank. After which I would recommend a Power feed body and a dropforward for the tank if you don't already have one.
I agree with covadsucks, HPA is the best upgrade with for a mag. Running a mag on co2 is like owning a dvd player that is hooked up to a black and white tv. It will work, but it isn't at its optimum. And, HPA systems are pretty cheap. especially at pbgear.com. Rock on IB.

[bvansickle3]

ok, Compressed Air it is.

- How much will a decent HPA setup cost me?
- what should I do to the gun AFTER I change the air setup?

[Yama]

nothing

you dont need to do anything to your gun after you switch to HPA, just oil it up and play:D

[jeradn325]

A decent nitro tank is a crossfire and they run about 80 and up then i would go with a double trigger or a smartparts barrel

[FrAuStY]

After you get nitro... get a good barrel system.. i.e. freak/equation then you will always be able to match you paint..and you'll be operating on HPA

[kosmo]

BTW, when you get hpa, be sure to ditch the expansion chamber. And you dont necessarily need a whole barrel system unless you shoot lots of different paint. Oh and if you dont have a motorized hopper, definately get one of those. I would get that even before hpa. And dont get a 9v revvy those are almost useless.

[chris99506]

will a z galactic body work on my rt????:confused: :confused:

[PaintballDude05]

Like Automag Rt?

[AGDMAG]

definitly a nitro tank and then either the intelliframe or the lvl 10 mod and also like said above u will be better off with a powerfeed mainbody

[xmetal2001]

Whatever you do, dont replace any valve parts with aftermarket parts. They either dont improve performance, or decrease performance. Only use AGD parts.

[paintbattler]

intelliframe

[jeffaah]

after HPA i would get an intlliframe

[Brendan]

I'd go:
1. Revvy: you'll chop paint without one. Get at least a 12 volt or ricochet
2. HPA: works wonders
3. Barrel
4. trigger frame (intelliframe)
5. Whatever