PDA

View Full Version : Trying to make my own mag


Monkeymag
06-28-2002, 11:13 AM
Im trying to make an automag out of parts i need to know all the internals that there are and what else is a good idea to get
rjvemt1
06-28-2002, 11:43 AM
why?
mykroft
06-28-2002, 12:22 PM
Valve, bolt, bolt spring, all stock.

Body rail & main body, twist-lock assembly, rail bushing, quick-strip bolt, gripframe, trigger, trigger pin (Last 2 come with all frames other than DYE & KAPP), front bolt screw.
drx975
06-28-2002, 04:22 PM
You might want a barrel with that list too, Mykroft. :eek:
BTAutoMag
06-28-2002, 09:51 PM
barrel? we dont need no stinken barrel
codeJockey
06-29-2002, 07:16 AM
Take a look at this as well:

Automag Manual (http://www.airgun.com/Images/automan.pdf)
Monkeymag
06-29-2002, 09:12 PM
I knew some of that. ummmm........ i just need to know what a twist lock assembly, a rail bushing, and i know what a bolt is but "quick strip" eludes me. I was planning for a emag bod dye dbl trigger frame retro valve super bolt kapp foregrip but thats all i could think of how do you get a rail bushing and a twist lock assembly.

Thanks alot
codeJockey
06-29-2002, 09:45 PM
You can get all of those thru airgun's online store (and other online stores as well). The twist lock is the spring-loaded cylinder that locks the barrel into the body. The rail bushing is simply the bushing in the body rail that the quick strip screw passes through. The quick strip screw is just a wide-headed, knurled screw that connects the trigger frame, body rail and valve together. Most body rails come with the twist lock and the rail bushing already in place.
BTAutoMag
06-29-2002, 10:27 PM
hey codeJockey, may i say...

thats alota chrome
Monkeymag
06-30-2002, 12:22 AM
I found all that except the valve bolt spring and the quick strip bold. and where does the valve go?
Monkeymag
06-30-2002, 12:27 AM
bolt*
xmetal2001
06-30-2002, 01:00 AM
You can edit your posts with the little edit button on the lower right of your posts.

The valve is that whole silver piece in the back that goes through the body. Its pretty much what makes a mag a mag. A bolt spring is the spring that goes around the bolt, the quickstrip bolt is the screw that holds the valve to the rail. You can see it as the little silver thing on the rail behind the gripframe.