Lvl 10 ?

[Micromag man!]

does the pressure of ur tank matter to how the lvl 10 work. If it was high like at 950-1100 would it chop more or have no effect? or does it work better higher?

[hitech]

Originally posted by Micromag man!
does the pressure of ur tank matter to how the lvl 10 work. If it was high like at 950-1100 would it chop more or have no effect? or does it work better higher?

The pressure the bolt sees is regulated by the A.I.R (or ReTro) value (via the build in pressure regulator). That's a long winded way of saying it don't matter. ;)

[cwuchu]

I wouldn't think that the pressure of your tank has much to do about how well the lvl 10 works since the input pressure is regulated automatically by the valve in all agd guns i believe. The input would have an effect only on the RT's trigger. Reports, however, tell otherwise?! (look at the post of the results of the beta testers).

[CpSuPeRkId]

well it shoudnt make a difference in bolt force/chopping issues, because the reg body takes the pressure down to 375 anyways. but u should have at least 800 to feed the reg enough to do its job