New Level 10 Sticker Poll: LX or Level 10? [Archive]

DiRTyBuNNy

07-25-2002, 07:38 PM

LoadSM5 has helped me out with some designs that look a little more like the Intel Logo..but my question is...do you like "Level 10 Inside" or "LX Inside"? We're going to be doing them black on white so that they can be seen easily and are NPPL legal.

http://www.automags.org/forums/attachment.php?s=&postid=396820

http://www.automags.org/forums/attachment.php?s=&postid=396821

(I know i'm the father of the "LX" name...but i voted for the level 10 inside...i think it just looks better)

RT pRo AuToMaG

07-25-2002, 07:42 PM

i'd say level 10 because some ppl outside AO might not know what LX is, shoot, most of them don't even know what level 10 is.

sicones

07-25-2002, 08:09 PM

LEVEL 10 inside is better I can't vote so I say level 10

FordPrefect

07-25-2002, 10:35 PM

This point has been raised before, but I think it is still relevant. If it is a hopper sticker, people are going to think you have Level 10 in your hopper. And people who don't know much about Mags won't get it at all. So the Intel idea is kinda stupid, unless you make it small enough to fit on a gun.

DiRTyBuNNy

07-26-2002, 01:13 AM

Well..if i put an AGD sticker on my hopper are they going to think that my Revy was made by AGD..???? .that's your opinion...i'm still going to make them..and some people still want them and if you don't like the idea you don't have to buy any..

TheTramp

07-26-2002, 07:41 AM

The forum has stoped letting me vote but if I could, I would vote for "Level 10." It looks better and more people would know what it means.

sicones

07-26-2002, 11:14 AM

Could somebody please make a picture of the level 10 one with red lettering and a black backround and post it, that would look sweet

hitech

07-26-2002, 11:32 AM

Originally posted by DiRTyBuNNy
...i'm still going to make them...

Good. I really want one. :D

Originally posted by DiRTyBuNNy
...If you don't like the idea you don't have to buy any.

Problem solved!

DiRTyBuNNy

07-26-2002, 02:29 PM

sorry..because of the NPPL limitation to only b&w stickers...I'm going to have to keep it simple...sorry...lame rules are lame rules...you might want to contact LoadSM5 and see if he could do one for you (You gonna use it for an avatar or sig?)

blackmag3

07-26-2002, 03:52 PM

i think level 10 sounds better than lx. i also think it would be better to have the sticker on the marker not on the hopper since level 10 is not in the hopper. black and white would be fine. i don't like the intel rip off ideas since thats far from original. also why does everyone have to add pie to a poll? it was funny once but not after that.

DiRTyBuNNy

07-26-2002, 06:03 PM

You know...I value people's opinion like the next person...but why do people with negative comments feel like everyone else has to read them...now..i can assume we all own automags...have you ever looked at your valve? do you know how small a sticker would have to be to fit on the valve? let's get realistic..it's not a jewel...if I put an AGD sticker on my hopper are people going to think AGD made my hopper...like i've said a million times...if you don't like them...don't buy them...but i don't care how you feel...and here's a little something to get off my chest:

IF I HEAR ONE MORE POST ABOUT EITHER THE SIZE AND PLACEMENT OF THE STICKER OR THE FACT THAT "THEY" THINK THE INTEL SPOOF IS A BAD IDEA I'M GOING TO KILL THIS WHOLE IDEA!I DIDN'T ASK FOR YOUR OPINION FOR ANYTHING BUT CHOOSE BETWEEN "level 10 inside" OR "LX inside"...IF YOU DON'T LIKE IT...DON'T POST..I DON'T CARE HOW YOU FEEL...DON'T BUY THEM...I'VE PUT MORE INTO THIS THAN ANYBODY ELSE...IF YOU'RE SO DAMN ORIGINAL YOU COME UP WITH THE GRAPHICS AND HAVE THEM MADE...IF NOT...SIT DOWN AND SHUT UP!!!!!!!!

blackmag3

07-26-2002, 06:16 PM

hey man sorry you got so upset about my opinion. i wasn't trying to sound negative just giving you some feedback that you might not have thought about. i do have an idea for where you could put the sticker instead of the hopper. how about an all inline text , like just left to right sayin level 10 , and have it on either side of the tube between the valve and were the balls feed. that way it would read level 10 then the words on the valve right after it. like i said before level 10 sounds better to me but that is mainly because lx makes me think of cars not paintball inventions. i hope you have good luck with this.

DiRTyBuNNy

07-26-2002, 06:31 PM

I'm sorry for seeming like i was attacking you personally...you're not the only one..i've gotten emails..Pm's...yadda yadda...my response to the valve or body sticker idea is this...you can see a hopper stick probably 5 times farther away from a body sticker because of size and placement...

DiRTyBuNNy

07-26-2002, 10:25 PM

well...if anyone wants to use this for their sig i'm posting a smaller version of it..

SlipknotX556

07-26-2002, 10:28 PM

Go with level 10 inside.

DiRTyBuNNy

07-27-2002, 12:43 PM

I went to Stickerguy.com and for 250 3.5" Circle vinyl stickers (black screenprinted on and not the cut out vinyl) they're looking at $51 shipped..so i'd probably charge .50 a piece and then whatever for shipping..

TransMan

07-27-2002, 09:30 PM

cool ill take 5 of them tell me when you want the MO

DiRTyBuNNy

07-27-2002, 09:44 PM

ok...i'm having some troubles because it looks like the only size i can get them in is a 4" circle..and the design is a slight oval shape so i'm not sure if it'll look odd..

TransMan

07-27-2002, 09:46 PM

ill still take 5 of them when do you think you will be able to ship them?

marley618

07-27-2002, 11:43 PM

I'll buy some too. So are the stickers going to be clear with "level 10 inside" written in black? Or is the background of the stickers going to be white?

DiRTyBuNNy

07-28-2002, 12:08 AM

the background is going to white to fully comply with NPPL regulations regarding sticker colors..

FreshmanBob

07-28-2002, 08:38 AM

I like the level 10 design and who cares if people don't get what level 10 is, it's been spread all over the net by now and by IAO even more people will know what it is.

Jonno06

07-28-2002, 09:54 AM

um.........

i want one REALLY small...so i can put it on my mag body,right where the bolt and stuff is...

cuz as a hopper sticker...it really makes no sence...

DiRTyBuNNy

07-28-2002, 10:15 AM

well..considering the fact that making it that small would make it all but undistinguisable from more than a few feet away i decided that that would be stupid...well..sorry..I can't help you...

Jonno06

07-28-2002, 10:27 AM

i guess.....

good point.

DiRTyBuNNy

07-28-2002, 12:12 PM

Here's the last question before i order them...would you rather have the sticker on 3.5" diameter circle or a 2.75x2.75" square...I know it's trivial..but i'm asking AO because i'm doing it for you guys...(BTW it's $25 for 250 of the 2.75" square and $51 per 250 for the circle)

jah871

07-28-2002, 12:14 PM

circle! it will look a lot better imo, they coould go on the sides o warps or the lids of revvys. also when you get these i will take about 3 or 4. thanks

TransMan

07-28-2002, 01:23 PM

circle

marley618

07-28-2002, 01:58 PM

I would prefer a small round sticker that goes right infront of the valve on my mag body. The sticker would be clear and the writing would be in black. I think those would be nice. Maybe a 1" or 1.5" diameter. Anyone else want to do that. I know Jonno want's one, I would prefer this over a hopper sticker. DiRTyBuNNy can you ask at the place where you are ordering the hopper stickers from how much those would cost? If you want to sell both I can help out with the cash up front or something. I'm just not a fan of hopper stickers.

slushee

07-28-2002, 05:29 PM

what about a lvl 10 small gel sticker that could be put on the mag body or grips? (personally like the lvl 10 as opposed to level 10 but whatever)

hmm anyone ever price out small gel stickers?

magmanl337

07-28-2002, 05:32 PM

im ust tesing my image, etc. sorry for your time. but i do like the level 10 inside logo. email as sooon as they are in prodiuction, as i would sure like one.

DiRTyBuNNy

07-28-2002, 09:13 PM

I'm considering doing some paintball jewels...for the emag that would just say "Level 10" but so far all the companies i've contacted have been slammed with orders from larger paintball companies..shutting out the small orders like mine for a considerable amount of time..I'm thinking about a lot of things guys...you just have to roll with me because i've got my feelers out everywhere....and as far as the smaller sticker debate..well..i've posted on it before..The problem is that most of the sticker companies will only do them in certail sizes in smaller quantities...I've found one that will do the 3.5" circle in 250 lot quantities...but they will only do the smaller 1.5" and 2" circles in 2k lot quantites..which is way too expensive and would be way too hard to sell..i can sell 250 of them...but 2000 is way too much..if the people that want the smaller stickers want to do the legwork and find me a place that will do them..hell..I'll front the money and use Load's artwork and get it done..but until then...i'm just going to stick with the 3.5" circles..

MagKoko

08-14-2002, 10:57 PM

didn't any of those guys read the size rant by bunny?

DiRTyBuNNy

08-14-2002, 11:11 PM

uuuummm..the answer would be no...

Dayspring

08-14-2002, 11:50 PM

I'd be in for a sticker or two. (Just in case one gets shot off somehow)

And in case nobody has said so-

THANK YOU.

DiRTyBuNNy

08-15-2002, 08:23 AM

I'm surprised someone revived this thread and it wasn't me...

angelKiller16

08-15-2002, 10:06 AM

DiRTyBuNNy, I have thought of one way to make people shut-up about the "level 10 inside the hopper?" morrons who don't know what level 10 is. In medium/small writing put AGD at the bottom of the logo. Hopefully this will give them a clue at least.

hitech

08-15-2002, 06:57 PM

Originally posted by DiRTyBuNNy
...i can sell 250 of them...i'm just going to stick with the 3.5" circles.

So, when are you going to have some? Any idea how much? I'd really like a few. :D

b1pball

08-15-2002, 10:36 PM

Our company makes stickers/ banners and can even to
t-shirts now. If you have the art work for anyof these things and you would like em done call Joe reyes and see what he can do for ya. His # is 301-932-4565.

Or you can contact "Snakestang" on AO and see if he can make em also and see what price he can do em for per sticker.He useually does runs of 100 at a time for the stickers he has made.

We are a Paintball shop but we are also a graphics and sigh shop.

DiRTyBuNNy

08-16-2002, 01:27 AM

I'm sorry kiddies...but i think i'm going to stop my idea for Level 10 stickers and fully support b1pball and Snakestang and their LX stickers...i just don't have the time or resources to get this off the ground...and i actually do like the design of Snakestangs stickers and have asked him how i would go about purchasing them and i hope that anyone who was interested in my stickers go check his out because they're really nice looking and well made...

snakestang

08-16-2002, 05:59 AM

I really do appreciate your compliments. I have spent a lot of time trying to put this together for everyone. So far its going well. My next job is going to be marketing them. I should have a complete list up in the dealers forum this weekend with all the pricing and shipping info. I have to warn you that I was shocked at the prices of vinyl to make these. I was shown the invoice for the materials ordered to make them and it was expensive. But never the less we are going to have them made up and see what happens.

DIRTyBUNNy I would like your permission as well as anyone else who was involved in making your design up so that I can go ahead and have some of your circles made up.

However before I dish out cash. Is there enough interest to get these sold? If not I may be digging myself a big hole.

Thanks Again
Chris

warpfeedmod

08-16-2002, 07:45 AM

I can probably get some done up in vinyl pretty cheap (if they'll cost anything at all)..I was working on getting some like the one in my sig but might be able to do more. but I did like the level 10 inside one, although the Parental Advisory ones are nice too :p

b1pball

08-16-2002, 08:13 AM

Well we are using 10 year vinyl . Chris was wanting them to last a little longer than cheep stuff. We had tried using cheep vinyl on a few of guns , but they dont last to long . the 10 year holds up better to paintball hits and cleaning .

DiRTyBuNNy

08-16-2002, 08:22 AM

Snakestang and b1pball...go right ahead...you've got my blessign to do what you want with the design...

warpfeedmod

08-16-2002, 09:53 AM

yeah Premium Spar-Cal vinyl (I think that's what it's called, been a while since I've been in the sign industry :P ) was great stuff..I made some designs for my buds bike with that and that was about 5 years ago..he's still got it on there and it looks as good as the day we put it on :p