PDA

View Full Version : RT on/off in MiniMag


Magluvr
08-14-2002, 07:05 PM
Someone told me that you can stick an RT on/off assembly into the standard MiniMag to lighten the trigger. Does this really work? Are there any drawbacks?
The Creature
08-14-2002, 07:17 PM
actually somebody just told me this as well...i planned on taking a trip sometime soon to go down to paintballwizard to test my theory. If they allow me to, i will post my results.
PyRo
08-14-2002, 09:41 PM
It gets easier to shortstroke, and you need to shorten the on-off pin I think.
The Creature
08-16-2002, 11:59 AM
yeah, short stroking will probably become an issue until you flux with the trigger rod (bad idea, but it only costs like 15 bucks for a new sear assembly if you screw it up, so its worth it)...but hey, thats what the level 10 is designed to prevent right ;)
athomas
08-16-2002, 04:14 PM
Yes, a retrovalve on/off will work on a standard mag valve. I didn't measure the difference in the trigger pull, but it felt good.
The Creature
08-16-2002, 11:45 PM
did you flux with anything to make it work correctly?
PyRo
08-17-2002, 07:17 AM
Even with the level 10 shortstroking will cause shootdown. It just won't chop paint...
Cristobal
08-17-2002, 08:41 PM
There's a thread in Deap Blue right now about this very subject: go here (http://www.automags.org/forums/showthread.php?s=&threadid=44110)