who here has an extreme?!

[speedballbanks]

stupid question, but since iao just passed i figure more people would have one, i want to "SEE" who has one so post pic's or just post if so. no side talk stuff, tell me what you like dislike about the extreme, and when, where you got it, and was it worth it.

[magman007]

spraying mango has one, manike, and pandora, and paul 4lk

[Nomad]

We can order them up here in Canada for some reason. :D :eek:

http://www.canadianpaintball.com/shopping/index.htm

(Click on AGD and scroll down)


And I emailed them.



Yes, as we are only 1 of 2 stocking distributors for Airguns, we can get them.

----- Original Message -----
From: Darwin Liu
To: sales@canadianpaintball.com
Sent: Monday, June 10, 2002 8:24 PM
Subject: E-Xtreme Question

Just outta curiosity I was under the impression that the E-Xtreme
mags had not yet been released as of yet, although you have them on your
order page.

Can you please clarify if you are acutally selling the Xtremes or
are they preorders??

Thank you

-Nomad


In other works, sucks to be an American right now. :p (J/K. More like sucks to be me, as I got like only $100 :mad: Grrr, damn financial problems. I'd get it right away if I could)

[Mango]

Here is my baby, #10! :)


http://mywebpages.comcast.net/jtrussell7/extreme.JPG

http://mywebpages.comcast.net/jtrussell7/extreme2.JPG

http://mywebpages.comcast.net/jtrussell7/closeupEX.JPG


I love it for lots of reasons, #1: It's a mag with Level 10!!!
#2: It's VERY light! Even with the warp on there the whole setup feels VERY light and tight.
#3: Interchangeable breeches rule.
#4: ACE (dont need it but it has it) with sensitivity adjusting pot.
#5: On/off switch is cool!! It's a tiny spring connected to a waterproof soft switch above where the pin whole is. So it wont break off and if you slide into a bunker and back is on so worst case if you hit it, it just stays on.
#6: Milling is pretty!


Got it at the IAO and it was worth EVERY penny. I don't know what I was thinking toteing around that IR3 :p


AGD FOREVER!!!! http://atypically.net/smilies/headbang.gif

[magman007]

boy im jellous for lots of reasons

1 it is an extreme!
2 it is an e-mag that works, unlike mine
3 it came annodized in a pretty color, unlike mine
4, you didnt have to home annodize it and ruin it, again unlike me
5 it looks prettyand im proud of you

[BajaBoy]

very very nice mango..

[SlipknotX556]

mango can I borrow it? PLEASE. Ill send you my emag. ;)

[Gitaroo Man]

yah...can i borrow it.....i swear i'll give it back *cough*

[Mango]

heheheheh

[Blennidae]

Such a nice gun, but whats with that standard brass 90 elbow on the valve? Don't go cheap on that, get the nice black swivel elbow...;)

[Jack & Coke]

SprayingMango,

Sweet setup brah...

Tell me, how do you like your crossfire tank? What's it preset at (psi)?

Also, since I'm left handed, will I be able to flip the side feed breech around so I can locate a warp on the right side of the gun?

Thanks,
J&Chttp://www.automags.org/forums/images/icons/icon14.gif

[Mossman]

too many!

[Mango]

Blennidae: It works and it's what I had, so thats why I used it. I'll get a nicer one later. :)

J&C: I love the crossfire tanks! I traded my Angel AIR for two 60/4500's I like them so much. They are preset at 850psi output, perfect for Mags. :) Also, they have righty and left warp output breeches. You can't switch a right breech around, because of the way the breech is milled and there is an O-ring on the front of the breech that the back of the barrel screws into. It's there to center the breech on the barrel for the best possible breech to barrel match for the ball. :)

[Havoc_online]

I don't know what I was thinking toteing around that IR3

Mango, that brought a tear to my eye.;)

[Emagster]

believeit or not...I think i am still gunna get one eventually. I'm gnna have a red and chrome color thing goin on. its gunna be tizight. but till I get my car and pay it off I'm gunna be perfectly happy with my emagnum

[pito189]

Why don't you use the 90* adapter on the warp breech and have the hose drop straight down into the warp? Would that not work better than having the long hose in the hopper?

[Mango]

pito: I heard that there could be feed issues useing the 90degree adapter. This is the most direct route, so I want to keep it simple. Plus there is equal pressure pushing into the warp breech and pushing the tube down into the warp, so it won't accidently come out. Just seemed tighter and stronger to do it this way. :D

[Pand0ra]

Originally posted by speedballbanks
stupid question, but since iao just passed i figure more people would have one, i want to "SEE" who has one so post pic's or just post if so. no side talk stuff, tell me what you like dislike about the extreme, and when, where you got it, and was it worth it.

You'll find pics of mine there:
http://www.automags.org/forums/showthread.php?s=&threadid=40939
and in the Xtremes in action thread:
http://www.automags.org/forums/showthread.php?s=&threadid=36389.
There's also a few on Warpig if you search in the gallery of the Toulouse.

Mine is the first one ever sold. Let's say it's the 000 :P .
It's an upgrade of my old Emag done by AGD-E. I've now all the stuff like the Lvl10, ACE and so on.
I got it two months ago, a week or two before Toulouse.

Sorry I can't find something I dislike on the Extreme C&C :rolleyes:
I've yet to find another marker at the same level of performances as the Emag Xtreme C&C.
I like also this kind of milling. The beauty is in the simplicity.

The Xtreme solves all the problems found on the Emag (too heavy for the taste of some people, breaks paintballs if you're not using a good loader, ...)

Was it worth it (you mean the 3 months I had to wait for the upgrade, due to problems of machining?). Hell YES!

@++