Lv 10 PF mag leaking

[HoppysMag]

ok i just gassed up my mag and its leaking down the barrel when i pull te trigger a little bit it leaks a little further and it stops and i oiled it and was out side shooting the oil through and i got a couple where it leaked sfter a shot... im gunna check my oring carrier but what else could it be?

[BajaBoy]

yea change your carrier that should fix it.. and some oil

[HoppysMag]

i changed carrier oring i guesse my old one must of dried out or sumthing cause it works now... ya i oiled it too... thanks for the advice...

[manike]

Take a shim out.

If it leaks and pulling the trigger slightly (not enough to fire the gun) stops the leak then you have too many shims in.

manike

[HoppysMag]

well it stoped for now but im playing tonight so if it leaks then il take out a shim.... its funn cause iv had my lv 10 set up for like a month or 2 now and the problem started today

[PyRo]

Weird :)

[HoppysMag]

well i played with it yesterday and it worked fine so it must have been the oring or sumthing...

[FrAuStY]

Actually the o-ring may have just broken in.., now you put a new o-ring in and its a possibility that leak will surface again. I would have recommended removing the o-ring from current carrier, pu tit in the next smallest carrier.. then re-installed everything. I had to do this with mine after about 500 rounds when I first got LVL10 going. If it starts leaking again, do what I said..I'm pretty sure it'll stop the leak. ;)

[HoppysMag]

Gotcha frausty:D