RT PRO Leak

[Duke Henry]

Hello everyone. After my gun worked flawlessly last week (and I oiled it afterwards), today I have a leak down my barrel. It is leaking pretty hard core.

Last time this happened (the only other time) I simply needed to reoil the gun a bit and it worked fine. So, I reoiled the powertube oring, and also oiled the piston (not sure if that is the name) - the piece that you can pop out the bottom of the valve body. I oiled the o-ring inside of the valve there and also oiled the o-ring for this bottom cap piece.

Still, it leaks pretty bad. I thought maybe the powertube o-ring was shot, but after pulling it out it looks fine. I also made sure it was all of the way "down" in the powertube, however it still leaks.

I think I have already stated it, but it leaks down the barrel...

[Havoc_online]

you put your bolt bumper back on right? if not that, try switching your bolt spring.

[Duke Henry]

I switched bolt springs, and no luck.

I just noticed however that when I turn my air supply up (meaning almost all the way "on" on my no/off) the gun also makes a constant farting noise...

Any ideas? Thanks

[Havoc_online]

how much pressure are you running to the gun?

[Duke Henry]

Thanks for the help, the problem is that I am an idiot.

Now that I have fixed the problem temporarily, I should be o.k. for a while...

;-)