RT/level 10

[madmag21]

okay first off if you put a Retrovalve in a automag classic how much will the trigger pull change? scale of 1-10 and please be realistic. Im looking for the cheapest way to make my mag run with the best of them so help is good. Another thing will AGD come out with an Retro valve with a level 10 mod already on it, and do you have to change trigger frames on a classic mag if you get a Retro valve put in it?

[PyRo]

Nope, same trigger frame. I don't think I have heard anything about retros comming with a level 10. But the classic level 10's will work on a retro.

[Schnitzel]

as far as trigger pull goes, that would depend on if you had a preset bottle or adjustable. If it's preset, the trigger will remain the same. As for adjustables, you can increase/decrease thew input pressure and make it crisper or softer. Don't go lower than 700psi of higher than 1100psi.

level 10 works on ALL valves. Chances are that retrovalves will be last to have lvl10 incorporated into them. 1st will be the extremes, and then it goes down the line of their best guns/valves.

[xmetal2001]

Originally posted by Schnitzel
If it's preset, the trigger will remain the same.

Actually, even though the same amount of pressure is entering the valve, the retro will give a more snappy, crisp pull than the classic. There is much difference from classic to retro at 850psi.

[Schnitzel]

i was talking about the fact that you cant change it. he's right, you can tell the difference.

[mihanikos]

From what I heard, all the valves will be lvl 10 by the end of this year, and the retro valves will be all aluminum like the cnc xmag valve.

[ketel1and7]

I've heard your output pressure can be below 700psi as long as you don't have an RT. With the RT, you need the added pressure to kick that trigger back.

With the others, it doesn't make a difference. Is that right?