lvl 10 bolt help

[rehme]

if i but my finger in my mag the bolt will just stop on it and it wont recock i can pull the trigger again and it will fire but i have the mid spring on it

[DarkPhoenix]

A solution that comes to mind could be to swap the bolt spring out for the longest spring and re-adjust your settings for that one.

[alee@usma]

As long as the bolt isn't venting air, I think it's fine. Mine recocks, but it might be different for the RT valve rather than a regular AIR valve.

If the bolt vents air when it stops on the finger, put one shim in at a time. Be careful though - if you didn't put the carrier in well, you could mangle a shim.

[Havoc_online]

if i but my finger in my mag the bolt will just stop on it and it wont recock you need to add a shim to bleed the pressure behind the bolt so it can re-engage. Most set-ups work best with two shims. I'd leave the cut spring.