PDA

View Full Version : This is your emag on level 10



Reo5th
10-09-2002, 05:17 PM
I got my emag, shot it for a while, never shortstroked. Pretty good gas efficiency.

Installed my level 10:
2 Carrier
2 shims

Now, in manual/hybrid i can't rip as much as I used to be able to. The efficiency went down to about 550 shots per 3000 fill on my 68. and the gun seems to 'shortstroke'

I know i shouldn't ask for this, but the sweetspot is also gone!

I know i've done something incorrectly, i just don't know what.

Could someone please help!?

thanks

BajaBoy
10-09-2002, 07:27 PM
use the small spring and shoot in the 270's.. or use med spring with higher input

joeyjoe367
10-09-2002, 10:22 PM
add a shim, gas it up. Keep adding shims until the gun leaks, then remove one.

That should solve your problem. I think a lot of times RT valves (in my experience) need more shims than std. valves.

manike
10-10-2002, 04:33 AM
Increase the input pressure into the gun. It sounds like it is starving a little. Level 10 needs a better input of air in my experience, you can get this with a higher input pressure or a better reg.

To get better efficiency use the middle spring.

manike